吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 157-162.doi: 10.13229/j.cnki.jdxbgxb201701023
• Orginal Article • Previous Articles Next Articles
LIN Chao, LIU Yi, WEI Yan-qun, ZHU Cai-chao
CLC Number:
[1] 刘昌祺,牧野洋,曹西京. 凸轮机构设计[M]. 北京:机械工业出版社,2005:294-300. [2] 魏引焕. 实现预定轨迹的凸轮连杆组合机构设计[J]. 陕西科技大学学报:自然科学版,2012,30(4):68-71. Wei Yin-huan. The design of cam-linkage combined mechanisms design for the given locus[J]. Journal 3 of Shanxi University(Science & Technology),2012,30(4):68-71. [3] 薛利峰. 基于齿轮-连杆组合机构的曲轴复合车削刀架系统研究[D]. 武汉:武汉理工大学机电工程学院,2012. Xue Li-feng. Research of following turning system of crankshaft based on the combined mechanisn of rod-gear[D]. Wuhan:School of Mechanical and Electronic Engineering,Wuhan University of Technology,2012. [4] 马良,石宁. 齿轮-五杆组合机构运动学特征仿真分析[J]. 西安科技大学学报,2013,35(6):727-730,764. Ma Liang,Shi Ning. Gear-5-bar combination mechanism's kinematics characteristic simulation[J]. Journal of Xi'an University of Science and Technology,2013,35(6):727-730,764. [5] Ottaviano E, Mundo D, Danieli G A, et al. Numerical and experimental analysis of non-circular gears and cam-follower systems as function generators[J]. Mechanism and Machine Theory,2008,43(8):996-1008. [6] 邹慧君,张青,王学武. 组合机构的基本特征和设计方法[J]. 机械设计与研究,2006,22(1):16-19. Zou Hui-jun,Zhang Qing,Wang Xue-wu. Basic characteristic and design method of the composite-mechanism[J]. Machine Design and Research, 2006,22(1):16-19. [7] 林超,张雷,张志华. 一种新型非圆锥齿轮副的传动原理及其齿面求解[J]. 机械工程学报,2014,50(13):66-72. Lin Chao,Zhang Lei,Zhang Zhi-hua. Transmission theory and tooth surface solution of a new type of non-circular bevel gears[J]. Journal of Mechanical Engineering, 2014,50(13):66-72. [8] Lin Chao, Liu Yi. Characteristic analysis and application of composite motion curve-face gear pair[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2016, 38(6):1797-1804. [9] 林超,龚海.复合传动变传动比面齿轮副[P].中国:2011104394780,2012-06-27. [10] Lin Chao, Gong Hai, Ning Nie,et al. Geometry design, 3D modeling and kinematics analysis of orthogonal fluctuating gear ratio face gear drive[J]. Journal of Mechanical Engineering Science,2013,227(4):779-793. |
[1] | BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776. |
[2] | ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786. |
[3] | LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507. |
[4] | WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105. |
[5] | HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113. |
[6] | XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123. |
[7] | SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132. |
[8] | YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139. |
[9] | LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146. |
[10] | LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780. |
[11] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
[12] | LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795. |
[13] | CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185. |
[14] | LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204. |
[15] | LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790. |
|