吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1144-1148.doi: 10.13229/j.cnki.jdxbgxb201704019

• Orginal Article • Previous Articles     Next Articles

Performance-enhanced two-degree-of-freedom energy harvester for low frequency vibration utilizing corrugated cantilever beam

WANG Hai, YAO Gang, QIU Wan-qun, YANG Chun-lai, FU Bang-chen   

  1. School of Mechanical and Automotive Engineering, Anhui Polytechnic University, Wuhu 241000, China
  • Received:2016-03-23 Online:2017-07-20 Published:2017-07-20

RICH HTML

0   

PDF (PC)

126

Abstract: Traditional Piezoelectric Energy Harvester (PEH) has high natural frequency and low electromechanical conversion efficiency. To overcome this problem a corrugate two-degree-of-freedom (2DOF) PEH is proposed. The energy harvesting characteristics are analyzed using theoretical modeling and numerical simulation. Results show that compared to 1DOF PEH and traditional 2DOF PEH, corrugate 2DOF PEH can achieve fifth order of resonance frequency in the range of 0 to 60 Hz. The fourth resonance frequency of the corrugate 2DOF PEH is 45.92 Hz, which is 419.9 Hz lower than that of 1DOF PEH, and 55.1 Hz lower than that of traditional 2DOF PEH. Meanwhile, the output voltage of the corrugate 2DOF PEH can be controlled as high as 28 V in the same condition, which is the highest voltage among the three harvesters.

Key words: mechanical design, piezoelectric energy harvesting, corrugated cantilevered beam, low frequency, two-degree-of-freedom

CLC Number: 

  • TH132
[1] Anton S R, Sodano H A. A review of power harvesting using piezoelectric materials (2003-2006)[J]. Smart Material and Structures, 2007, 16(3):1-21.
[2] 闫世伟,杨志刚,阚君武,等. 压电陶瓷能量转换系统[J].吉林大学学报:工学版, 2008,38(2):344-348.
3 Yan Shi-wei, Yang Zhi-gang, Kan Jun-wu, et al. Energy conversion system with piezoelectric ceramic[J]. Journal of Jilin University (Engineering and Technology Edition), 2008,38(2):344-348.
[3] Elvin N G, Elvin A A. An experimentally validated electromagnetic energy harvester[J]. Journal of Sound and Vibration, 2011,330(10):2314-2324.
[4] Glynne-Jones P, Tudor M J, Beeby S P, et al. An electromagnetic vibration-powered generator for intelligent sensor systems[J]. Sensors and Actuators A: Physical, 2004,110(1-3):344-349.
[5] Sheu G J, Yang S M, Lee T. Development of a low frequency electrostatic comb-drive energy harvester compatible to soc design by cmos process[J]. Sensors and Actuators A: Physical, 2011,167(1):70-76.
[6] Naruse Y, Matsubara N, Mabuchi K, et al. Electrostatic micropower generation from low-frequency vibration such as human motion[J]. Journal of Micromechanics and Microengineering, 2008,19(9):19-22.
[7] Knight C,Joshua D,Sam B. Energy options for wireless sensor nodes[J]. Sensors,2008,8(12): 8037-8066.
[8] Chen S N, Wang G J, Chien M C. Analytical modeling of piezoelectric vibration-induced micro power generator[J]. Mechatronics, 2006, 16(9): 379-387.
[9] 管青春. 悬臂梁式压电能量回收装置结构优化[D]. 合肥:中国科学技术大学物理学院, 2011.
Guan Qing-chun.Structual optimization of cantilever piezoelectric energy harvesting devices[D]. Hefei:School of Physical Sciences, University of Science and Technology of China,2011.
[10] Leland E S,Wright P K. Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload[J]. Smart Materials and Structures,2006,15(5):1413-1420.
[11] Wu Hao, Tang Li-hua, Yang Yao-wen,et al. Development of a broadband nonlinear two-degree-of-freedom piezoelectric energy harvester[J]. Journal of Intelligent Material System and Structure, 2014, 25(14):1875-1889.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd