吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (5): 1542-1547.doi: 10.13229/j.cnki.jdxbgxb201705028

Previous Articles     Next Articles

Synthesis microstructure and thermal properties of high performance bulk Al

TANG Hua-guo1, 2, 3, MA Xian-feng1, 2, ZHAO Wei1, 2, LIU Jian-wei1, 2, ZHAO Zhen-ye1, 2   

  1. 1.Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130021, China;
    2.State Key Laboratory of Rare Earth Resource Utilization, Chinese Academy of Sciences, Changchun 130021, China;
    3.University of Chinese Academy of Sciences, Beijing 100049, China
  • Received:2016-05-10 Online:2017-09-20 Published:2017-09-20

RICH HTML

0   

PDF (PC)

227

Abstract:

Heat resistant bulk Al was prepared by mechanical milling, cold isostatic pressing and press-forming technique. The bulk Al possesses stable microstructure, with grain size between 0.6 and 4 μm, and the ultimate tensile strength, 536 MPa, surpasses that of most commercial Al alloys, especially at high temperature. The heat exposure experiment was carried out at 200 ℃, 300 ℃ and 350 ℃ for 4320 h. The high temperature endurance strength is 381 MPa, 242 MPa and 178 MPa corresponding to 200 ℃, 300 ℃ and 350 ℃ respectively. The pinning action of the second-phase dispersoids in bulk Al highly restrains grain growth during the process of hating.

Key words: metallic materials, bulk ultrafine Al, mechanical milling, press-forming, thermal stability

CLC Number: 

  • TG3
[1] 杨悦, 陈彬. SiC纳米颗粒对6060型铝合金微弧氧化膜组织结构及耐蚀性能的影响[J]. 吉林大学学报:工学版,2011, 41(1):106-110.
Yang Yue, Chen Bin. Effects of SiC nano-particles on microstructure and the corrosion resistance of micro-arc oxidation films produced on aluminium alloy[J]. Journal of Jilin University(Engineering and Technology Edition), 2011, 41(1): 106-110.
[2] Frank R E, Hawk J A, Effect of very high temperatures on the mechanical properties of Al-Fe-V-Si alloy[J].Scr Metall, 1989, 23:113-118.
[3] Srivastava A K, Ojha S N, Ranganathan S. Microstructural features and heat flow analysis of atomized and spray-formed Al-Fe-V-Si alloy[J]. Metallurgical and Materials Transactions A, 1998, 29(8):2205-2219.
[4] Lee S,Lee D Y,Kimm N J. Correlation of microstructure and fracture toughness of a rapid solidification-powder metallurgy Al-Fe-V-Si alloy[J]. Materials Science & Engineering A, 1991, 147(1):33-44.
[5] Yan Q, Fu D, Deng X, et al. Tensile deformation behavior of spray-deposited FVS0812 heat-resistant aluminum alloy sheet at elevated temperatures[J]. Materials Characterization, 2007, 58(6):575-579.
[6] Gilman P S, Rateick R G, Testa A. The fabrication of rapidly solidified high temperature aluminum alloys[J]. Adv Powder Metall,1991,6:47-57.
[7] Das S K, Bye R L, Gilman P S. Large scale manufacturing of rapidly solidified aluminum alloys[J]. Materials Science & Engineering A, 1991, 134(12):1103-1106.
[8] Chen Z,Huang P,Jiang X,et al. A novel multi-layer spray deposition technology[J]. Journal of Central South University, 1996, 3(2):110-116.
[9] Rizaneh S,Borhani G H,Tavoosi M. Synthesis and characterization of Al (Al 2 O 3 -TiB 2 /Fe) nanocomposite by means of mechanical alloying and hot extrusion processes[J]. Adv Powder Technol, 2014, 25: 1693-1698.
[10] Deaquino-Lara R, Gutiérrez-Castañeda E, Estrada-Guel I, et al. Structural characterization of aluminium alloy 7075-graphite composites fabricated by mechanical alloying and hot extrusion[J]. Mater Des, 2014, 53:1104-1111.
[11] Deaquino-Lara R, Estrada-Guela I, Hinojosa-Ruizc G, et al. Synthesis of aluminum alloy 7075-graphite composites by milling processes and hot extrusion[J]. Journal of Alloys & Compounds, 2011, 509(6):284-289.
[12] Soltani N, Nodooshan H R J, Bahrami A, et al. Effect of hot extrusion on wear properties of Al-15 wt.% Mg 2 Si in situ metal matrix composites[J]. Mater Des, 2014, 53: 774-781.
[13] Tang H G, Cheng Z Q, Liu J W, et al. Preparation of a high strength Al-Cu-Mg alloy by mechanical alloying and press-forming[J]. Materials Science & Engineering A, 2012, 550:51-54.
[14] 汤华国,赵伟,刘建伟,等. 细晶金属铝的制备及力学性能[J].应用化学, 2015, 32(9):1070-1074.
Tang Hua-guo, Zhao Wei, Liu Jian-wei, et al. Synthesis and mechanical performance of bulk ultrafine Al[J]. Chinese Journal of Applied Chemistry, 2015, 32(9):1070-1074.
[15] Kennedy A R, Wyatt S M. The effect of processing on the mechanical properties and interfacial strength of aluminium/TiC MMCs[J]. Comp Sci Technol, 2000, 60:307-314.
[16] Cintas J, Montes J M, Cuevas F G, et al. Heat-resistant bulk nanostructured P/M aluminium[J]. J Alloys Compd, 2008, 458: 282-285.
[1] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[2] LIU Xiao-bo, ZHOU De-kun, ZHAO Yu-guang. Microstructure and mechanical property of Mg2Si/Al composites fabricated by semi-solid extrusion under different isothermal heat treatments [J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[3] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[4] ZHANG Jia-tao, ZHAO Yu-guang, TAN Juan. Effect of starting microstructure on refining potency of electro-pulsing on reverse austenite grain [J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[5] MA Yun-hai, SHANG Wen-bo, FAN Xue-ying, GAO Zhi-hui, TONG Jin, YAN Zhi-feng, CHANG Zhi-yong. Preparation and degradation of porous β-tricalcium phosphate bioceramic for bone imitaion [J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
[6] GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong. Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205.
[7] GAO Song, LIANG Ji-cai, CHEN Guang-yi, WEI Zhi-yong, TENG Fei. Rapid adjusting of fundamental units in process of flexible 3D stretch-bending [J]. 吉林大学学报(工学版), 2014, 44(6): 1723-1728.
[8] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel [J]. 吉林大学学报(工学版), 2014, 44(4): 1037-1041.
[9] GUAN Qing-feng,JI Le,CAI Jie,YANG Sheng-zhi,LIU Shi-chao,ZHANG Zai-qiang,HOU Xiu-li. Surface microstructure and properties of 3Cr13 martensitic stainless steel after high current pulsed electron beam bombardment [J]. 吉林大学学报(工学版), 2014, 44(3): 712-717.
[10] LI Xin,WANG Gang,LU Guan-han,GU Zheng-wei,XU Hong. Weldability of 22MnB5 after hot stamping by TIG welding processes [J]. 吉林大学学报(工学版), 2014, 44(3): 708-711.
[11] CHANG Ying, LI Ye, YING Liang, LU Jin-dong, TANG Xing-hui, GUO Wei. Effect of oxidation behavior on heat transfer dynamics performance of hot stamping steel [J]. 吉林大学学报(工学版), 2013, 43(06): 1551-1557.
[12] WANG Yun, LIU Cai, MA Li-dong, WANG Yu-feng, HUANG Qing-xue. Analysis of interval between guides during two-roll straightening process [J]. 吉林大学学报(工学版), 2013, 43(03): 677-681.
[13] WANG Su-fen, PENG Yan, LI Zhi-jie, XIAO Li-zi. Cold rolling mechanical characteristics of low carbon base plate produced by compact strip production [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 221-224.
[14] XU Hong, SHEN Yong-bo, GU Zheng-wei, MENG Jia, YU Si-bin, LI Xin. Test on hot stamping process of automotive ultra high strength steel beams [J]. 吉林大学学报(工学版), 2011, 41(增刊1): 111-114.
[15] YANG Yue, CHEN Bin. Effects of SiC nano-particles on microstructure and the corrosion resistance of micro-arc oxidation films produced on aluminium alloy [J]. 吉林大学学报(工学版), 2011, 41(增刊1): 106-110.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd