吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 122-128.doi: 10.13229/j.cnki.jdxbgxb201701018

• 论文 • 上一篇    下一篇

三轴正时链系统的磨损及其限定条件

范成岩1, 许树新1, 王洪军2, 孟繁忠1   

  1. 1.吉林大学 链传动研究所,长春 130022;
    2.杭州东华链条集团有限公司,杭州 311102
  • 收稿日期:2015-09-18 出版日期:2017-01-20 发布日期:2017-01-20
  • 通讯作者: 许树新(1964-),男,教授,博士.研究方向:链传动理论及应用.E-mail:xushuxin@jlu.edu.cn
  • 作者简介:范成岩(1962-),男,副教授.研究方向:链传动理论及应用.E-mail:fancy40@163.com
  • 基金资助:
    国家自然科学基金项目(51275207).

Wear and limiting condition of three-axial timing chain system

FAN Cheng-yan1, XU Shu-xin1, WANG Hong-jun2, MENG Fan-zhong1   

  1. 1.Chain Transmission Institute,Jilin University,Changchun 130022,China;
    2.Hangzhou Donghua Chain Co., Ltd., Hangzhou 311102, China
  • Received:2015-09-18 Online:2017-01-20 Published:2017-01-20

RICH HTML

0   

PDF (PC)

341

摘要： 在已知汽车发动机正时链系统几何布局的基础上,研究了进、排气凸轮轴的滞后角对发动机配气相位的影响,进而提出了正时链极限磨损伸长率的限定条件。设计了符合发动机正时链实际装机运行的并兼顾链轮与链条的啮合冲击等情况的可靠性试验方法,通过进气凸轮轴单边加载正时链系统模拟试验台,进行了国产正时齿形链系统和MORSE正时齿形链系统的怠速和交变负荷模拟试验。结果显示,初期磨损约占全部磨损伸长的四分之一以上,这表明控制零件制造精度、保证装配质量可以显著提高正时齿形链使用寿命,同时张紧器柱塞的随动响应特性也是提高正时链系统动力特性的关键因素。

关键词: 机械设计, 汽车发动机, 正时齿形链, 张紧器, 磨损特性

Abstract: On the basis of geometric layout of the timing chain system of the automobile engine, the influence of the lag angle of camshaft on phase change of the timing chain system is studied, and the constraint conditions of the timing chain wear limit elongation are put forward. According to the working condition of high speed, variable speed and variable load, the reliability test rule of the actual loading chain of the engine is designed. The rule also covers the sprocket and chain meshing impact. The idle speed and alternating load simulation tests of the domestic timing chain system and the MORSE timing chain system are carried out on a positive timing chain system simulation test bench. Results show that the initial wear is about more than 1/4 of the total wear elongation, which indicates that controlling the manufacturing precision of the parts and ensuring the assembly quality can significantly improve the service life of the timing chain. Meanwhile the dynamic response characteristics of tension the device are the key factors to improve the timing chain system dynamic characteristics.

Key words: mechanical design, automotive engine, timing silent chain, tension device, wear characteristics

中图分类号: 

  • TH132
[1] Calabretta M, Cacciatore D, Carden P, et al. Development of a timing chain drive model for a high speed gasoline engine[J].SAE International Journal of Engines, 2011, 4(1): 432-440.
[2] Konyha Z, Matkovic K, Gracanin D,et al. Interactive visual analysis of a timing chain drive using segmented curve view and other coordinated views[C]∥The 5th International Conference on Coordinated and Multiple Views in Exploratory Visualization, Washington, DC, USA, 2007: 3-15.
[3] 孟繁忠,张进平,许树新. 汽车链发动机总成试验及磨损特性[J]. 吉林大学学报:工学版,2008,38(增刊):99-102.
Meng Fan-zhong, Zhang Jin-ping, Xu Shu-xin. Engine assembly test and wear characteristics of automobile chain[J]. Journal of Jilin University(Engineering and Technology Edition), 2008,38(Sup.):99-102.
[4] 孟繁忠. 齿形链啮合原理[M]. 2版. 北京:机械工业出版社,2015.
[5] Wang K W. Vibration analysis of engine timing chain drives with camshaft torsional excitations[C]∥Proceedings of the Noise & Vibration Conference, New York, USA,1991: 196-207.
[6] 张京正,王勇,薛云娜. 发动机正时链波动与冲击特性[J]. 山东大学学报:工学版,2007,37(2):30-33.
Zhang Jing-zheng, Wang Yong, Xue Yun-na. The fluctuation and impact effect of the engine time chain[J]. Journal of Shandong University(Engineering Science), 2007, 37(2): 30-33.
[7] Sopouch M, Hellinger W, Pribsch H H. Prediction of vibroacoustic excitation due to the timing chains of reciprocating engines[J]. Journal of Multi-Body Dynamics,2003, 217(3): 225-240.
[8] Engelhardt T, Hoesl A, Lebrecht W,et al. Simulation of timing chain drives using ketsim[C]∥Proceedings of the 2004 Fall Technical Conference of the ASME Internal Combustion Engine Division, Long Beach,California,USA,2004: 547-553.
[9] 李一民,郝志勇,张志明,等. 汽油机正时链传动动力学仿真研究[J]. 内燃机工程,2013,34(1):81-86.
Li Yi-min, Hao Zhi-yong, Zhang Zhi-ming, et al. Simulation research on dynamic characteristic of timing chain trains of gasoline engine[J]. Chinese Internal Combustion Engine Engineering, 2013, 34(1): 81-86.
[10] Polat O, Ebrinc A A, Ozen C, et al. Timing chain wear assessment with different type of oils[C]∥SAE Papers,2009-01-0198.
[11] Maile K, Campean F, Day A. Design for reliability of an engine timing chain[C]∥SAE Papers,2009-01-0206.
[12] Xu S, Wang Y, Meng F. Study on the reliability evaluation method of the wear life of roller chains. Proceedings of the institution of mechanical engineers part C[J]. Journal of Mechanical Engineering Science, 2006, 220(10): 1569-1574.
[13] GB/T 19055-2003.汽车发动机可靠性试验方法[S].
[14] 许树新,孟繁忠,冯增铭,等. 汽车变速箱Hy-Vo齿形链磨损特性的研究[J]. 摩擦学学报,2012,32(1): 76-81.
Xu Shu-xin, Meng Fan-zhong, Feng Zeng-ming, et al. Wear characteristics of Hy-Vo silent chain for automobile gearbox[J]. Tribology, 2012, 32(1):76-81.
[1] 毕秋实,王国强,黄婷婷,毛瑞,鲁艳鹏. 基于DEM-FEM耦合的双齿辊破碎机辊齿强度分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1770-1776.
[2] 朱伟,王传伟,顾开荣,沈惠平,许可,汪源. 一种新型张拉整体并联机构刚度及动力学分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1777-1786.
[3] 刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[4] 毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[5] 王涛, 伞晓刚, 高世杰, 王惠先, 王晶, 倪迎雪. 光电跟踪转台垂直轴系动态特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[6] 贺继林, 陈毅龙, 吴钪, 赵喻明, 汪志杰, 陈志伟. 起重机卷扬系统能量流动分析及势能回收系统实验[J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[7] 谢传流, 汤方平, 孙丹丹, 张文鹏, 夏烨, 段小汇. 立式混流泵装置压力脉动的模型试验分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[8] 孙秀荣, 董世民, 王宏博, 李伟成, 孙亮. 整体抽油杆柱在油管内空间屈曲的多段式仿真模型对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[9] 吉野辰萌, 樊璐璐, 闫磊, 徐涛, 林烨, 郭桂凯. 基于MBNWS算法的假人胸部结构多目标优化设计[J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[10] 刘坤, 刘勇, 闫建超, 吉硕, 孙震源, 徐洪伟. 基于体外传感检测的人体站起动力学分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[11] 刘志峰, 赵代红, 王语莫, 浑连明, 赵永胜, 董湘敏. 重载静压转台承载力与油垫温度场分布的关系[J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[12] 曹婧华, 孔繁森, 冉彦中, 宋蕊辰. 基于模糊自适应PID控制的空压机背压控制器设计[J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[13] 李锐, 张路阳, 刘琳, 武粤元, 陈世嵬. 基于相似理论的三跨桥梁磁流变隔振[J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[14] 陈忠敏, 侯力, 段阳, 张祺, 杨忠学, 蒋易强. 新型摆线针轮行星减速器传动系统的振动特性[J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[15] 刘念, 徐涛, 徐天爽, 胡贤磊, 刘维海. 基于差厚技术的汽车仪表板管梁轻量化设计[J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发