吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (6): 1957-1963.doi: 10.13229/j.cnki.jdxbgxb201706038

• 论文 • 上一篇    下一篇

基于最优特征的改进经验模态分解方法

刘薇娜1, 周小龙1, 姜振海2, 马风雷2   

  1. 1.长春理工大学 机电工程学院,长春 130022;
    2.长春工业大学 机电工程学院,长春 130012
  • 收稿日期:2016-08-04 出版日期:2017-11-20 发布日期:2017-11-20
  • 作者简介:刘薇娜(1956-),女,教授,博士生导师.研究方向:精密、超精密加工,检测及装备.E-mail:wnliu77@163.com
  • 基金资助:
    国家自然科学基金项目(51075041); 吉林省教育厅“十二五”科学技术研究重点项目(J00-JYT2014-12)

Improved empirical mode decomposition method based on optimal feature

LIU Wei-na1, ZHOU Xiao-long1, JIANG Zhen-hai2, MA Feng-lei2   

  1. 1.College of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, China;
    2.School of Mechatronic Engineering, Changchun University of Technology, Changchun 130012, China
  • Received:2016-08-04 Online:2017-11-20 Published:2017-11-20

RICH HTML

0   

PDF (PC)

225

摘要： 针对经验模态分解(EMD)过程中存在的模态混叠等问题,提出了一种基于最优特征的自适应白噪声平均总体经验模态分解方法。该方法采用基于边界局部均值延拓的方法抑制端点效应问题,同时,在经验模态分解的每个阶段自适应地添加有限次白噪声,保证在平均次数相对少的情况下,通过计算唯一残余分量来获取信号的固有模态函数,从而避免了模态混叠问题的产生。通过分析仿真信号和实测信号,证明了该方法对模态混叠现象有一定的抑制作用,同时可有效避免端点效应问题的产生。

关键词: 机械设计, 经验模态分解, 最优特征, 模态混叠, 固有模态函数

Abstract: To solve the problem that mode mixing exists during Empirical Mode Decomposition (EMD), an improved EMD method based on the best feature of intrinsic mode function is proposed. First, the method of boundary local mean is used to deal with the end effect problem. Meanwhile, limited white noises are added at each stage of the EMD. Then, a unique residual component is computed to get each intrinsic mode function with a small number of ensemble size, thus, the mode mixing problem is solved. The results of the numerical simulation and real experiments show that the proposed method has good performance in solving the mode mixing problem and can restrain the end effect problem effectively.

Key words: mechanical design, empirical mode decomposition(EMD), optimal feature, mode mixing, intrinsic mode function

中图分类号: 

  • TN911.7
[1] Huang N E, Shen Z, Long S R, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis[J]. Proceeding of the Royal Society of London-Series A: Mathematical, Physical and Engineering Sciences,1998,454(1971):903-995.
[2] 陈艳娜. 基于EEMD的旋转机械故障诊断方法研究[D].哈尔滨:哈尔滨理工大学电气与电子工程学院,2013.
Chen Yan-na. Research on fault diagnosis of rotating machinery method based on EEMD algorithm[D]. Haerbin: College of Electrical & Electronic Engineering, Harbin University of Science and Technology,2013.
[3] 姜万录,卢传奇,朱勇. 基于HHT和模糊C均值聚类的轴向柱塞泵故障识别[J]. 吉林大学学报:工学版,2015,42(2):429-436.
Jiang Wan-lu, Lu Chuan-qi,Zhu Yong. HHT and fuzzy C-means clustering-based fault recognition for axial piston pump[J]. Journal of Jilin University (Engineering and Technology Edition),2015,45(2):429-436.
[4] Wang X, Cai J L, He K J. EMD copula based value at risk estimates for electricity markets[J]. Procedia Computer Science,2015,55:1318-1324.
[5] Xie Q W, Xuan B, Li J P, et al. EMD algorithm based on bandwidth and the application on one economic data analysis[C]//15th European Signal Processing Conference,Poznan, Poland,2007:2419-2423.
[6] Bai F, Zhang J, Zheng J. Similarity analysis of DNA sequences based on the EMD method[J]. Applied Mathematics Letters,2011,24:323-237.
[7] 朱赛,尚伟. 经验模态分解中包络线算法[J]. 火力与指挥控制,2012,37(9):125-128.
Zhu Sai, Shang Wei. Analysis and study of envelope algorithm in EMD[J]. Fire Control & Command Control,2012,37(9):125-128.
[8] 雷亚国. 基于改进Hilbert-Huang 变换的机械故障诊断[J]. 机械工程学报,2011,47(5):71-77.
Lei Ya-guo. Machinery fault diagnosis based on improved Hilbert-Huang transform[J]. Journal of Mechanical Engineering,2011,47(5):71-77.
[9] 于介德,程军圣,杨宇. 机械故障诊断的Hilbert-Huang变换方法[M]. 北京:科学出版社,2006:54-69.
[10] 邵晨曦,王剑,范金锋,等. 一种自适应的EMD端点延拓方法[J]. 电子学报,2007,35(10):1943-1948.
Shao Chen-xi, Wang Jian, Fan Jin-feng, et al. A self-adaptive method dealing with the end issue of EMD[J]. Acta Electronica Sinica,2007,35(10):1943-1948.
[11] 方琨,王渝,马利兵,等. 基于RO-SBM的Hilbert-Huang变换端点效应抑制方法[J]. 振动、测试与诊断,2013,33(2):319-324.
Fang Kun,Wang Yu,Ma Li-bing, et al. Improved method for restraining end effect in Hilbert-Huang transform based on RO-SBM and its applications[J]. Journal of Vibration,Measurement & Diagnosis,2013,33(2):319-324.
[12] Li Y, Xu M, Wei Y, et al. An improvement EMD method based on the optimized rational hermite interpolation approach and its application to gear fault diagnosis[J]. Measurement, 2015,63:330-345.
[13] Wu Z H, Huang N E. Ensemble empirical mode decomposition: a noise-assisted data analysis method[J]. Advances in Adaptive Analysis,2009,1(1):1-41.
[14] Torres M E, Colominas M A, Schlotthauer G, et al. A complete ensemble empirical mode decomposition with adaptive noise[C]//IEEE International Conference on Speech and Signal Processing, Prague,Czech,2011:4144-4147.
[15] 孔德同,刘庆超,雷亚国,等. 一种改进的EEMD方法及其应用研究[J]. 振动工程学报,2015,28(6):1015-1021.
Kong De-tong, Liu Qing-chao, Lei Ya-guo, et al. The improved EEMD method and its application[J]. Journal of Vibration and Engineering,2015,28(6):1015-1021.
[16] 王佃武. 基于小波分析的齿轮箱齿轮点蚀故障诊断[D]. 兰州:兰州理工大学流体动力与控制学院,2006.
Wang Dian-wu. Gear pitting corrosion fault diagnosis in gearbox based on wavelet analysis[D]. Lanzhou:College of Fluid Power and Control, Lanzhou University of Technology,2006.
[1] 毕秋实,王国强,黄婷婷,毛瑞,鲁艳鹏. 基于DEM-FEM耦合的双齿辊破碎机辊齿强度分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1770-1776.
[2] 朱伟,王传伟,顾开荣,沈惠平,许可,汪源. 一种新型张拉整体并联机构刚度及动力学分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1777-1786.
[3] 刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[4] 毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[5] 王涛, 伞晓刚, 高世杰, 王惠先, 王晶, 倪迎雪. 光电跟踪转台垂直轴系动态特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[6] 贺继林, 陈毅龙, 吴钪, 赵喻明, 汪志杰, 陈志伟. 起重机卷扬系统能量流动分析及势能回收系统实验[J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[7] 谢传流, 汤方平, 孙丹丹, 张文鹏, 夏烨, 段小汇. 立式混流泵装置压力脉动的模型试验分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[8] 孙秀荣, 董世民, 王宏博, 李伟成, 孙亮. 整体抽油杆柱在油管内空间屈曲的多段式仿真模型对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[9] 吉野辰萌, 樊璐璐, 闫磊, 徐涛, 林烨, 郭桂凯. 基于MBNWS算法的假人胸部结构多目标优化设计[J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[10] 刘坤, 刘勇, 闫建超, 吉硕, 孙震源, 徐洪伟. 基于体外传感检测的人体站起动力学分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[11] 刘志峰, 赵代红, 王语莫, 浑连明, 赵永胜, 董湘敏. 重载静压转台承载力与油垫温度场分布的关系[J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[12] 曹婧华, 孔繁森, 冉彦中, 宋蕊辰. 基于模糊自适应PID控制的空压机背压控制器设计[J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[13] 李锐, 张路阳, 刘琳, 武粤元, 陈世嵬. 基于相似理论的三跨桥梁磁流变隔振[J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[14] 陈忠敏, 侯力, 段阳, 张祺, 杨忠学, 蒋易强. 新型摆线针轮行星减速器传动系统的振动特性[J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[15] 刘念, 徐涛, 徐天爽, 胡贤磊, 刘维海. 基于差厚技术的汽车仪表板管梁轻量化设计[J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发