›› 2012, Vol. ›› Issue (06): 1378-1383.

• 论文 • 上一篇    下一篇

基于径向基函数神经网络的车内噪声品质评价系统

高印寒1, 唐荣江2, 梁杰1, 樊宽刚3, 张澧桐2, 钱堃2   

  1. 1. 吉林大学 汽车仿真与控制国家重点实验室, 长春 130022;
    2. 吉林大学 仪器科学与电气工程学院, 长春 130061;
    3. 江西理工大学 机电工程学院, 江西 赣州 341000
  • 收稿日期:2012-02-18 出版日期:2012-11-01
  • 通讯作者: 梁杰(1965-),男,研究员.研究方向:车辆NVH性能分析与控制.E-mail:liangjie1965@yahoo.com.cm E-mail:liangjie1965@yahoo.com.cm
  • 基金资助:
    吉林省科技发展计划项目(20100361,20126007);江西省教育厅科技计划项目(GJJ12353).

Vehicle interior noise sound quality evaluation system based on RBF neural network

GAO Yin-han1, TANG Rong-jiang2, LIANG Jie1, FAN Kuan-gang3, ZHANG Li-tong2, QIAN Kun2   

  1. 1. State Key Laboratory of Automobile Simulation and Control, Jilin University, Changchun 130022, China;
    2. College of Instrumentation and Electrical Engineering, Jilin University, Changchun 130061, China;
    3. College of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou, 341000, China
  • Received:2012-02-18 Online:2012-11-01

摘要: 为了高效而准确地对车内噪声品质进行评价,针对B级车稳态工况下的车内噪声,建立了基于径向基函数(RBF)神经网络的声品质评价系统。用等级评分法对30个稳态噪声信号进行了主观评价试验,并通过相关分析得出了对声品质有重要影响的客观参量。采用RBF神经网络构建了车内噪声品质的评价模型,其预测平均相对误差为4.5%。以评价模型为基础,采用模块化设计方法和多线程并行处理技术,设计了基于虚拟仪器的声品质评价系统。测试结果表明:该系统比传统的主观评价试验系统的测试时间缩短了90%,并提高了评价结果的质量。

关键词: 车辆工程, 车内噪声, 声品质评价, 径向基函数神经网络, 虚拟仪器

Abstract: An evaluation system was established to evaluate efficiently and accurately the sound quality of the interior noise of B-class vehicle in the steady working conditions based on the radial basis function(RBF) neural network.The subjective evaluation tests were carried out for 30 steady noise signal samples with the grade estimation method.The objective parameters having significant effect on the sound quality were extracted by the correlation analysis.An evaluation model was built to predict the sound quality of the vehicle interior noise using an RBF neural network,its average relative predict error is 4.5%.Based on the predict model, using the modular design concept and the multi-threaded parallel processing technique, a virtual instrument based sound quality evaluation system was designed.The field test results showed that compared with traditional subjective evaluation method,the designed system reduces the test time by 90%,and the quality of the evaluation is better.

Key words: vehicle engineering, vehicle interior noise, sound quality evaluation, radial basis function(RBF) neural network, virtual instrument

中图分类号: 

  • U467
[1] Genuit K. The sound quality of vehicle interior noise: a Challenge for the NVH engineers[J]. Vehicle Noise and Vibration, 2004,1:158-168.
[2] 孙强.基于人工神经网络的汽车声品质评价与应用研究.长春:吉林大学仪器科学与电气工程学院,2011. Sun Qiang. Research on evaluation and application of vehicle sound quality based on artificial neural network. Changchun:College of Instrumentation and Electrical Engineering, Jilin University,2011.
[3] 高印寒,孙强,梁杰.B级轿车车内噪声品质的主观评价研究[J].噪声与振动控制,2010,30(4):115-118. Gao Yin-han, Sun Qiang, Liang Jie. Subjective evaluation research of B-class car'S interior sound quality[J]. Noise and Vibration Control, 2010,30(4):115-118.
[4] Brandl F K,Biermayer W. A new tool for the onboard objective assessment of vehicle interior noise quality[C]//SAE Paper,1999-01-1695.
[5] Nor M J M, Fouladi M H, Nahvi H, et al. Index for vehicle acoustical comfort inside a passenger car[J]. Applied Acoustics, 2008,69(4): 343-353.
[6] 申秀敏,左曙光,李林,等.车内噪声声品质的支持向量机预测[J].振动与冲击,2010,29(6):66-68. Shen Xiu-min, Zuo Shu-guang, Li Lin, et al. SVM predictor of vehicle interior sound quality[J]. Journal of Vibration and Shock, 2010,29(6):66-68.
[7] Yildrim S, Eski I. Sound quality analysis of cars using hybrid neural networks[J]. Simulation Modeling Practice and Theory, 2008, 16: 410-418.
[8] 刘含波,王昕,强文义.RBF隐式曲面的离散数据快速重建[J].光学精密工程,2008,16(2):338-343. Liu Han-bo, Wang Xin, Qiang Wen-qiang. A fast reconstruction method for implicit surface based on RBF[J]. Opt Precision Eng,2008,16(2):338-343.
[9] 董长虹.Matlab神经网络与应用[M].北京:国防工业出版社,2005:89-93.
[10] Zwicker E, Fastl H. Psychoacoustics, Facts and Models[M]. Germany: Springer, 1999:230-248.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!