产品规划中顾客需求分析的集成方法

doi:10.13229/j.cnki.jdxbgxb201504028

吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (4): 1213-1218.doi: 10.13229/j.cnki.jdxbgxb201504028

产品规划中顾客需求分析的集成方法

吕锋^{1, 2}, 杨印生¹, 汤晋¹

1.吉林大学工程仿生教育部重点实验室,长春 130022;
2.河南科技大学机电工程学院,河南洛阳 471023

收稿日期:2014-01-03 出版日期:2015-07-01 发布日期:2015-07-01
通讯作者: 杨印生(1963-),男,教授,博士生导师.研究方向:农业系统工程.E-mail:yys@jlu.edu.cn
作者简介:吕锋(1980-),男,讲师,博士研究生.研究方向:农业系统工程.E-mail:lvfeng1980@126.com
基金资助:
国防技术基础项目(Z132011A003); 河南省科技攻关计划项目(102102210487); 洛阳市科技计划项目(20130703); 河南科技大学校青年基金项目(2012QN030)

Integration method for customer requirement analysis in product planning

LYU Feng^{1, 2}, YANG Yin-sheng¹, TANG Jin¹

1.Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;
2.School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang 471023, China

Received:2014-01-03 Online:2015-07-01 Published:2015-07-01

摘要/Abstract

摘要： 为了有效地评估产品规划中的顾客需求,提出了基于粗糙集、决策试验和评价实验(DEMATEL)和改进Kano模型的集成分析方法,以合理地确定顾客需求最终重要度。利用粗糙集理论的属性重要度原理,可以确定最简约集各顾客需求的基本重要度。考虑到顾客需求自相关关系的影响,引入DEMATEL方法,以修正顾客需求基本重要度。应用基于竞争性分析Kano模型,建立重要度调整函数,使顾客需求类别、竞争性分析与重要度计算相结合,通过规范化处理得到顾客需求最终重要度。以某农用拖拉机新产品的开发为实例,验证了集成方法的有效性和可行性。

关键词: 机械设计, 质量功能展开, 顾客需求, 粗糙集, 决策实验和评价实验, Kano模型

Abstract: In order to effectively evaluate customer requirements in product planning, an analysis method was proposed by integrating rough set theory, DEMATEL method and Kano's model. First, the attribute importance principle of rough set theory is adopted to determine the fundamental importance of customer requirements. Second, considering the influence of the correlations between customer requirements, the fundamental importance of customer requirements is modified by DEMATEL method. Third, based on the competitive analysis of Kano's model, the adjustment function of importance rating is built, which integrates the customer demand category, competitive analysis and importance rating calculation. Finally, the weight vector, which reflects the final importance rating of the customer requirements, is obtained by normative approach. A case study of the development of new farm tractors demonstrates that the proposed analysis method is effective and feasible.

Key words: mechanical design, quality function deployment, customer requirements, rough set, DEMATEL, Kano model

中图分类号:

TH122

吕锋, 杨印生, 汤晋. 产品规划中顾客需求分析的集成方法[J]. 吉林大学学报(工学版), 2015, 45(4): 1213-1218.

LYU Feng, YANG Yin-sheng, TANG Jin. Integration method for customer requirement analysis in product planning[J]. 吉林大学学报(工学版), 2015, 45(4): 1213-1218.

参考文献

[1] Liu Hao-tien. Product design and selection using fuzzy QFD and fuzzy MCDM approaches[J]. Applied Mathematical Modeling,2011,35(1):482-496.
[2] Ronald G D. Quality Function Deployment[M]. Milwaukee Wisconsin: ASQC Press,1993.
[3] Ho W. Integrated analytic hierarchy process and its applications-a literature review[J]. European Journal of Operational Research,2008,186(1):211-228.
[4] Raharjo H, Xie M, Brombacher A C. A systematic methodology to deal with the dynamics of customer needs in quality function deployment[J]. Expert Systems with Applications,2011,38(4): 3653-3662.
[5] 张树山,高大新,王涛,等. 基于DQFD的物流服务能力设计、仿真与优化[J]. 吉林大学学报:工学版,2009,39(增刊2):204-208. Zhang Shu-shan, Gao Da-xin, Wang Tao, et al. Research on the design, simulation and optimization of logistics services ability based on dynamic quality function deployment[J]. Journal of Jilin University (Engineering and Technology Edition),2009,39(Sup.2):204-208.
[6] 车阿大, 林志航, 陈康宁. 质量功能配置中基于ANN的顾客需求重要度评估方法[J]. 西安交通大学学报,1999,33(5):75-78. Che A-da, Lin Zhi-hang, Chen Kang-ning. Capturing weight of voice of the customer using artificial neural network in quality function development[J]. Journal of Xi'an Jiaotong University,1999,33(5):75-78.
[7] Zhang Zai-fang, Chu Xue-ning. Fuzzy group decision-making for multi-format and multi- granularity linguistic judgments in quality function deployment[J]. Expert Systems with Applications,2009,36(5):9150-9158.
[8] 钟晓芳, 刘思峰. 模糊德菲法和熵权重法在不确定环境下产品设计中功能选择的应用[J]. 工业工程,2009,12(4):78-81. Zhong Xiao-fang, Liu Si-feng. Fuzzy delphi method for function selection in product design with uncertainty[J]. Industrial Engineering Journal,2009,12(4):78-81.
[9] Chen C C, Chuang M C. Integrating the Kano model into a robust design approach to enhance customer satisfaction with product design[J]. International Journal of Production Economics, 2008,114(2):667-681.
[10] Zhai L Y, Khoo L P, Zhong Z W. Towards a QFD-based expert system: a novel extension to fuzzy QFD methodology using rough set theory[J]. Expert Systems with Applications,2010,37(12):8888-8896.
[11] 李延来, 唐加福, 蒲云, 等. 质量功能展开中顾客需求的排序算法[J]. 计算机集成制造系统, 2007,13(6):1196-1203. Li Yan-lai, Tang Jia-fu, Pu Yun, et al. Sorting algorithm of customer requirements in quality function deployment[J]. Computer Integrated Manufacturing Systems, 2007,13(6):1196-1203.
[12] 崔强, 武春友, 匡海波. BP-DEMATEL在空港竞争力影响因素识别中的应用[J]. 系统工程理论与实践,2013, 33(6):1471-1478. Cui Qiang, Wu Chun-you, Kuang Hai-bo. Influencing factors research of airports competitiveness based BP-DEMATEL model[J]. Systems Engineering-Theory & Practice, 2013, 33(6):1471-1478.
[13] Lee Hsuan-Shih, Tzeng Gwo-Hshiung,Yeih Weichung, et al. Revised DEMATEL:resolving the infeasibility of DEMATEL[J]. Applied Mathematical Modelling,2013,37(10):6746-6757.
[14] Matzler K, Hinterhuber H H. How to make product development projects more successful by integrating Kano's model of customer satisfaction into QFD[J]. Technovation,1998,18(2):25-38.
[15] Berger C, Blauth R, Boger D, et al. Kano's methods for understanding customer-defined quality[J]. Center for Quality Management Journal, 1993,2(4): 3-36.
[16] Chaudha A,Jain R, Singh A R, et al. Integration of Kano's model into quality function deployment (QFD)[J]. International Journal of Advanced Manufacturing Technology, 2011,53(5): 689-698.

相关文章 15

[1]	毕秋实,王国强,黄婷婷,毛瑞,鲁艳鹏. 基于DEM-FEM耦合的双齿辊破碎机辊齿强度分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1770-1776.
[2]	朱伟,王传伟,顾开荣,沈惠平,许可,汪源. 一种新型张拉整体并联机构刚度及动力学分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1777-1786.
[3]	刘建芳, 王记波, 刘国君, 李新波, 梁实海, 杨志刚. 基于PMMA内嵌三维流道的压电驱动微混合器[J]. 吉林大学学报(工学版), 2018, 48(5): 1500-1507.
[4]	毛宇泽, 王黎钦. 鼠笼支撑一体化结构对薄壁球轴承承载性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1508-1514.
[5]	王涛, 伞晓刚, 高世杰, 王惠先, 王晶, 倪迎雪. 光电跟踪转台垂直轴系动态特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[6]	贺继林, 陈毅龙, 吴钪, 赵喻明, 汪志杰, 陈志伟. 起重机卷扬系统能量流动分析及势能回收系统实验[J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[7]	谢传流, 汤方平, 孙丹丹, 张文鹏, 夏烨, 段小汇. 立式混流泵装置压力脉动的模型试验分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[8]	孙秀荣, 董世民, 王宏博, 李伟成, 孙亮. 整体抽油杆柱在油管内空间屈曲的多段式仿真模型对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[9]	吉野辰萌, 樊璐璐, 闫磊, 徐涛, 林烨, 郭桂凯. 基于MBNWS算法的假人胸部结构多目标优化设计[J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[10]	刘坤, 刘勇, 闫建超, 吉硕, 孙震源, 徐洪伟. 基于体外传感检测的人体站起动力学分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[11]	刘志峰, 赵代红, 王语莫, 浑连明, 赵永胜, 董湘敏. 重载静压转台承载力与油垫温度场分布的关系[J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[12]	曹婧华, 孔繁森, 冉彦中, 宋蕊辰. 基于模糊自适应PID控制的空压机背压控制器设计[J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[13]	李锐, 张路阳, 刘琳, 武粤元, 陈世嵬. 基于相似理论的三跨桥梁磁流变隔振[J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[14]	陈忠敏, 侯力, 段阳, 张祺, 杨忠学, 蒋易强. 新型摆线针轮行星减速器传动系统的振动特性[J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[15]	刘念, 徐涛, 徐天爽, 胡贤磊, 刘维海. 基于差厚技术的汽车仪表板管梁轻量化设计[J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

产品规划中顾客需求分析的集成方法

Integration method for customer requirement analysis in product planning

RICH HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 10