吉林大学学报(工学版)

• • 上一篇    下一篇

电动助力转向系统转向感觉主观模糊评价方法

施国标1,张昕2,林逸1

  

  1. 1.北京理工大学 机械与车辆工程学院,北京 100081; 2.北京交通大学 机械与电子控制工程学院,北京 100044
  • 收稿日期:2006-08-17 修回日期:2006-11-06 出版日期:2007-07-01 发布日期:2007-07-01
  • 通讯作者: 施国标

Subjective fuzzy evaluation of steering feel for electric power steering system

Shi Guo-biao1,Zhang Xin2,Lin Yi1

  

  1. 1.School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China; 2.School of Mechanical Electric and Control Engineering, Beijing Jiaotong University, Beijing 100044, China
  • Received:2006-08-17 Revised:2006-11-06 Online:2007-07-01 Published:2007-07-01
  • Contact: Shi Guo-biao

摘要:

针对EPS系统进行了四种试验工况的整车转向感觉主观评价试验,从轻便性、回正性、灵敏度、方向修正难易程度、转向精确程度、路感、侧倾感觉、疲劳程度等几个方面进行评价。应用多层次模糊方法建立了用于EPS转向感觉模糊评价的阶层化模型,综合考虑影响EPS转向感觉的各个方面,对模型做出综合的决策,从而获得系统全面的主观评价结果。

关键词: 车辆工程, 电动助力转向, 转向感觉, 主观评价, 多层次模糊评价

Abstract: The vehicle steering feels of the electric power steering(EPS) system, including the maneuver ability of steering, the return ability of steering, the sensitivity of steering, the difficulty to correct the steering direction, the precision of steering, the road feel, the roll feel, and the tiredness by steering,etc.,were evaluated subjectively under four test conditions. A hiarachic fuzzy evaluation model to evaluate the steering feels of the EPS system was established by the hiarachic fuzzy method. The comprehensive decision was incorporated in the model to consider the manysided factors affecting the steering feels of the EPS system, and a systematic all-round subjective evaluation was obtained.

Key words: vehicle engineering, electric power steering(EPS), steering feel, subjective evaluation, hiarachic fuzzy evaluation

中图分类号: 

  • U463.3
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!