吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1136-1141.doi: 10.13229/j.cnki.jdxbgxb201604019

• Orginal Article • Previous Articles     Next Articles

Thermal characteristic analysis in hydraulic transmission system of wheel loader

WANG Zhen-bao, QIN Si-cheng, MA Run-da   

  1. College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2015-03-23 Online:2016-07-20 Published:2016-07-20

RICH HTML

0   

PDF (PC)

110

Abstract: In order to solve the thermal characteristic requirements in hydraulic transmission system of loader, the heating mechanism and heat transfer process were analyzed. The heat balance model of the hydraulic transmission system was established based on the simplified heat balance calculation method, and heat production optimization model was built to reduce energy loss. For efficient calculation, simulation program was developed on Matlab. The power loss, quantity of heat and the temperature in the hydraulic transmission system of a ZL50 wheel loader were simulated under typical working condition, and the simulation results were compared with the test results. It is shown that the equilibrium temperatures of the transmission oil are within the normal working oil temperature scope under two kinds of operation mode. The heat balance model of the hydraulic transmission has good imitating accuracy and can predict the oil temperature rise curve. This research can provide a reference for the design and optimization of a hydraulic transmission system.

Key words: fluid power transmission and control, loader, hydraulic transmission, heat balance

CLC Number: 

  • TK81
[1] 常绿. 装载机发动机与液力变矩器功率匹配优化[J].农业机械学报,2010,41(7):25-29.
Chang Lü. Optimization of power matching on torque-converter with diesel engine for wheel loader[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(7):25-29.
[2] Murin J. Some properties of a diesel drive line with hydrodynamic torque converters of the latest generation[J]. Mechanism and Machine Theory,2005,40(1):99-117.
[3] 万国强,黄英,张付军,等. 液力自动变速器换挡过程标定方法研究[J]. 兵工学报,2012,33(2):142-148.
Wan Guo-qiang,Huang Ying,Zhang Fu-jun,et al. Research on the calibration method for gear shifting of automatic transmission[J]. Acta Armamentarii,2012,33(2):142-148.
[4] 吴强,姚俊,付亮,等. 装载机液力变速器及其操控技术发展[J]. 机械传动,2010,35(4):69-73.
Wu Qiang,Yao Jun,Fu Liang,et al. Hydraulic transmission and development of manipulation control technology for loader[J].Journal of Mechanical Transmission,2010,35(4):69-73.
[5] 闫清东,于涛,朱丽君,等.工程车辆液力机械传动效率控制[J]. 吉林大学学报:工学版,2013,43(3):602-606.
Yan Qing-dong,Yu Tao,Zhu Li-jun,et al. Efficiency control of hydrodynamic-mechanical transmission of engineering machinery[J].Journal of Jilin University (Engineering and Technology Edition),2013,43(3):602-606.
[6] 刘明增. 装载机液力变速器主要性能及综合性能评价研究[D]. 济南:山东大学机械工程学院,2014.
Liu Ming-zeng. Research on main performance and comprehensive performance evaluation of loader hydraulic transmission box[D]. Ji'nan:School of Mechanical Engineering,Shandong University,2014.
[7] 吴光强,孙贤安. 汽车自动变速器发展综述[J]. 同济大学学报:自然科学版,2010,38(10):1478-1483.
Wu Guang-qiang,Sun Xian-an. Development survey of automobile automated transmission[J]. Journal of Tongji University(Natural Science),2010,38(10):1478-1483.
[8] 陈凯,吴光强.基于遗传算法的液力变矩器与发动机匹配的多目标优化[J]. 汽车工程,2014,36(5):532-536.
Chen Kai, Wu Guang-qiang. Genetic algorithm-based multi-objective optimization for the matching of torque converter with engine[J]. Automotive Engineering,2014,36(5):532-536.
[9] 吴新,连晋毅. 基于MATLAB的液力变矩器的热仿真分析[J]. 机械传动,2013,39(1):94-97.
Wu Xin,Lian Jin-yi. The thermal simulation analysis of the hydraulic torque converter based on the MTALAB[J]. Journal of Mechanical Transmission,2013,39(1):94-97.
[10] 邱宣怀.机械设计[M].4版. 北京:高等教育出版社,1997.
[11] 许翔,毕小平. 车用液力传动装置的传热研究[J]. 机械传动,2004,28(4):9-12.
Xu Xiang,Bi Xiao-ping. The research for heat transfer of hydraulic transmission device[J]. Journal of Mechanical Transmission,2004,28(4):9-12.
[12] 杨世铭,陶文铨. 传热学[M]. 4版. 北京:高等教育出版社,1998.
[13] 王开宝,秦四成,王雪莲,等. ZL80型轮式装载机变速器工作热特性分析[J]. 工程机械,2008,39(3):32-36.
Wang Kai-bao,Qin Si-cheng,Wang Xue-lian,et al. Thermal characteristic analysis for transmission on model ZL80 wheel loader[J]. Construction Machinery and Equipment,2008,39(3):32-36.
[1] JIA Tuo,ZHAO Ding-xuan,CUI Yu-xin. Method of rollover pre-warning for articulated loader [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1762-1769.
[2] JIANG Ji-hai, GE Ze-hua, YANG Chen, LIANG Hai-jian. Differentiator-based discrete variable structure controller for direct drive electro-hydraulic servo system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1492-1499.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WEN De-sheng, WANG Jing, GAO Jun-feng, ZHOU Cong. Pressure variation characteristics in cavity of double-stator single-action vane pump [J]. 吉林大学学报(工学版), 2017, 47(4): 1094-1101.
[5] ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[6] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[7] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system [J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.
[8] YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148.
[9] ZHANG Qin-guo, QIN Si-cheng, MA Run-da, YANG Li-guang, XI Yuan, LIU Jin-qiao. Hydraulic system thermal characteristics of loader working device [J]. 吉林大学学报(工学版), 2016, 46(3): 811-817.
[10] ZHANG Qin-guo, QIN Si-cheng, Yang Li-guang, MA Run-da, LIU Yu-fei, LI Wu. Thermal environment prediction of loader engine cabin in a virtual wind tunnel [J]. 吉林大学学报(工学版), 2016, 46(1): 50-56.
[11] WANG Jian-peng, QIN Si-cheng, YANG Li-guang, LI Wu. Simulation analysis of heat transfer in the hydraulic system of loader [J]. 吉林大学学报(工学版), 2016, 46(1): 153-158.
[12] LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824.
[13] MA Wen-xing, ZHANG Yan, LEI Yu-long. Design and test of control system of hydrodynamic automotive transmission for heavy vehicle [J]. 吉林大学学报(工学版), 2015, 45(5): 1455-1460.
[14] WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467.
[15] DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[2] ZHOU Feng-dao, TANG Hong-zhong, GUO Xin, WANG Jin-yu. Current overshoot produce principle and inhibition of transmitter of time domain electromagnetic detection system[J]. 吉林大学学报(工学版), 2013, 43(04): 1023 -1028 .
[3] LIU Shao-gang, GUO Yun-long, JIA He-ming. Rescue robot simultaneous localization and mapping based on extraction and matching of line features[J]. 吉林大学学报(工学版), 2013, 43(04): 1035 -1044 .
[4] LI Zhan-shan, ZHANG Liang, GUO Jin-song, ZHANG Qian. Boundary heuristic based on problem structure[J]. 吉林大学学报(工学版), 2013, 43(04): 1045 -1051 .
[5] SANG Ai-jun, MU Sen, WANG Mo-lin, CUI Hai-ting, CHEN He-xin. Multi-view video coding based on multi-dimensional vector matrix[J]. 吉林大学学报(工学版), 2013, 43(04): 1110 -1115 .
[6] TONG Jin, WANG Ya-hui, FAN Xue-mei, ZHANG Shu-jun, CHEN Dong-hui. Monitoring system of cold chain logistics for farm fresh produce[J]. 吉林大学学报(工学版), 2013, 43(06): 1707 -1711 .
[7] LIN Jun,FU Lei,WANG Yan-zhang,XU Jiang,JI Yan-ju,YANG Meng-meng. Development of sensor used for grounded electrical source air-ground transient electromagnetic detection[J]. 吉林大学学报(工学版), 2014, 44(3): 888 -894 .
[8] GAO Zhen-hai, LI Yang, ZHANG Hui, ZHANG Li-dan, HU Hong-yu. Driver's forward-looking behavior analysis during lane change under different speed[J]. 吉林大学学报(工学版), 2016, 46(5): 1385 -1390 .
[9] SU Chang, FU Li-ming, WEI Jun, LI Shuo, HUANG Lei, CAO Yue. Design method in exterior color based Kansei engineering and principal component analysis[J]. 吉林大学学报(工学版), 2016, 46(5): 1414 -1419 .
[10] LANG Li-hui, WANG Yao, LI Kui, SUN Zhi-ying, ZHANG Quan-da. Factors influencing inverse bulging effect in sheet hydroforming[J]. 吉林大学学报(工学版), 2016, 46(5): 1567 -1576 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd