吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1121-1129.doi: 10.13229/j.cnki.jdxbgxb201704016

• Orginal Article • Previous Articles     Next Articles

Spatial tooth profile design of harmonic drive by rack approximation method

WANG Jia-xu1, YUAN Pan1, TAN Chun-lin2, HE Yong-qiang2, LI Jun-yang1, XIAO Ke1   

  1. 1.State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400044, China;
    2.China Academy of Space Technology, Beijing 100094, China
  • Received:2016-03-10 Online:2017-07-20 Published:2017-07-20

RICH HTML

0   

PDF (PC)

274

Abstract: To solve the problems of transmission precision reduction caused by large meshing backslash and tooth profile interference caused by axial coning in the design of involute tooth profile of harmonic drive, a tooth profile new design method of harmonic drive based on rack approximation method was presented. The method considers the actual meshing situation and takes advantage of rack approximation design to design and correct the approximate tooth profile based on the actual movement route of flexspline relative to circular spline. The flexspline coning caused by assembly deformation is also considered to design the spatial tooth profile of flexspline at sections other than the main section. Results show that the tooth profile of harmonic drive designed by the proposed method has very small backslash and very wide-range meshing. Non-interfering engagement at arbitrary section can be achieved under no-load condition by changing the thickness of the tooth bottom rim of flexspline based on linear relationship.

Key words: mechanical design, harmonic drive, rack approximation method, engagement theory, spatial tooth profile

CLC Number: 

  • TH132.43
[1] Musser C W. Strain wave gearing[P]. United State Patent: 2906143,1959-09-29.
[2] 沈允文,叶庆泰. 谐波齿轮传动的理论和设计[M]. 北京:机械工业出版社,1985.
[3] 辛洪兵. 研究谐波齿轮传动啮合原理的一种新方法[J]. 中国机械工程,2002,13(3):181-183.
Xin Hong-bing. A new method for research on engagement principle of harmonic drive[J]. China Mechanical Engineering, 2002,13(3):181-183.
[4] 范元勋,王华坤,宋德锋. 谐波齿轮传动共轭齿廓的计算机数值模拟研究[J]. 南京理工大学学报:自然科学版, 2002,26(4):389-392.
Fan Yuan-xun, Wang Hua-kun, Song De-feng. Research on computer simulation for conjugate tooth profiles of the harmonic drive[J]. Journal of Nanjing University of Science and Technology(Nature Science),2002,26(4):389-392.
[5] 沈允文.论谐波齿轮传动的齿形[J].齿轮,1986,10 (4):51-56.
Shen yun-wen. Research on tooth profile of harmonic gear drive[J]. Journal of Gear,1986, 10(4):51-56.
[6] 辛洪兵.双圆弧谐波齿轮传动基本齿廓设计[J]. 中国机械工程,2011,22(6):656-662.
Xin hong-bing. Design for basic rack of harmonic drive with double-circular-arc tooth profile[J]. China Mechanical Engineering. 2011,22 (6):656-662.
[7] 王家序,周祥祥,李俊阳,等. 不同共轭原理的双圆弧齿廓谐波齿轮传动分析[J]. 四川大学学报:工程科学版,2015,47(5):160-166.
Wang Jia-xu, Zhou Xiang-xiang, Li Jun-yang, et al. The double-cir-cular-arc tooth profile of harmonic drive analysis based on different conjugate principle[J]. Journal of Sichuan University(Engineering Science Edition), 2015,47(5):160-166.
[8] 吴伟国,于鹏飞,侯月阳,等. 短筒柔轮谐波齿轮传动新设计新工艺与实验[J]. 哈尔滨工业大学学报,2014,46(1):40-46.
Wu Wei-guo,Yu Peng-fei,Hou Yue-yang, et al. New design,new process of harmonic drive with short flexspline and its experiment[J]. Journal of Harbin Institute of Technology,2014,46(1):40-46.
[9] Chen X X, Liu Y S, Xing J Z, et al. The parametric design of double-circular-arc tooth profile and its influence on the functional backlash of harmonic drive[J]. Mechanism and Machine Theory, 2014,73:1-24.
[10] 陈晓霞,林树忠,邢静忠,等. 圆弧齿廓谐波齿轮侧隙及干涉检查仿真[J]. 计算机集成制造系统,2011, 17(3):643-648.
Chen Xiao-xia, Lin shu-zhong, Xing Jing-zhong, et al. Simulation on gear backlash and interference check of harmonic drive with circular-arc teeth profile[J]. Computer Integrated Manufacturing Systems,2011,17 (3):643-648.
[11] Ishikawa Shoichi, Kanagawa Yokohama. Tooth profile of spline of strain wave[P]. United State Patent: 4823638,1989-04-25.
[12] Ishikawa Shoichi, Kanagawa Yokohama, Kiyosawa Yoshihide, et al. Flexible meshing gearing having three-dimensional, non-interactive wide-area intermeshing tooth profile[P]. United State Patent: 5458023, 1995-10-17.
[13] Ishikawa Shoichi, Kanagawa Yokohama, Takizawa Noboru, et al. Wave gear drive with continuous meshing, high ratcheting torque tooth profile[P]. United State Patent: 7694607 B2, 2010-04-13.
[14] Ishikawa Shoichi, Kanagawa Yokohama. Strain wave gearing having a non-interfering wide mesh range tooth profile[P]. United State Patent: 5918508, 1999-07-06.
[15] Ishikawa Shoichi, Kanagawa Yokohama. Flexible meshing type gearing having three-dimensional, non-interactive wide-area intermeshing tooth profile[P]. United State Patent: 6167783 B1, 2001-01-02.
[16] Ishikawa Shoichi, Kanagawa Yokohama. Wave gear device having three-dimensionally contactable shifted tooth profile[P]. United State Patent: 8776638 B2, 2014-07-15.
[17] 王家序,周祥祥,李俊阳,等. 杯形柔轮谐波传动三维双圆弧齿廓设计[J]. 浙江大学学报:工学版,2016,50(4):616-624.
Wang Jia-xu, Zhou Xiang-xiang, Li Jun-yang, et al. Three dimensional profile design of cup harmonic drive with double-circular-arc common-tangent tooth profile[J]. Journal of Zhejiang University (Engineering Science),2016, 50(4):616-624.
[18] 刘邓辉,邢静忠,陈晓霞. 渐开线谐波齿轮空间齿廓设计及仿真分析[J]. 计算机集成制造系统,2015(3):709-715.
Liu Deng-hui, Xing Jing-zhong, Chen Xiao-xia. Spatial tooth profile design and simulation analysis of harmonic drive with involute tooth profile[J]. Computer Integrated Manufacturing Systems, 2015(3):709-715.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd