吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1149-1155.doi: 10.13229/j.cnki.jdxbgxb201604021

• Orginal Article • Previous Articles     Next Articles

Modeling method of bolted joint interface based on gradient virtual materials

LIAO Jing-ping1, 2, ZHANG Jian-fu1, 2, YU Ding-wen1, 2, FENG Ping-fa1, 2   

  1. 1.Department of Mechanical Engineering, Tsinghua University, Beijing 100084,China;
    2.Beijing Key Laboratory of Precision/Ultra-precision Manufacturing Equipments and Control, Tsinghua University,Beijing 100084,China
  • Received:2015-03-06 Online:2016-07-20 Published:2016-07-20

RICH HTML

0   

PDF (PC)

131

Abstract: To improve the modeling precision of bolted joints, a new modeling method based on gradient virtual materials was proposed. First, the contact pressure distribution on bolted joint interface was obtained through interpolating and revising the contact interface force. Then, the analytical expressions of the elastic modulus and shear modulus were derived for gradient virtual material according to Hooke Law. By using a layering method, the analytical formulas of the gradient virtual material was inserted into finite element software to construct the interface model. Qualitative comparison of similar mode and quantitative comparison of corresponding natural frequency were carried out between the simulation and experimental results. It is shown that the first six order vibration shapes of the gradient virtual material models are consistent with experimental results. The modeling precision of the gradient virtual material model is much better than that of traditional virtual material model.

Key words: mechanics, bolted joint, contact pressure distribution, gradient virtual material, modal analysis

CLC Number: 

  • TH113.1
[1] Marshall M B, Zainal I, Lewis R. Influence of the interfacial pressure distribution on loosening of bolted joints[J]. Strain, 2011,47(2): 65-78.
[2] Wang Lei, Liu Hai-tao, Zhang Jun, et al. Analysis and modeling for flexible joint interfaces under micro and macro scale[J]. Precision Engineering, 2013,37(4): 817-824.
[3] 蔡力钢,郝宇,郭铁能,等. 螺栓结合面法向静态刚度特性提取方法研究[J]. 振动与冲击,2014,33(16):18-23.
Cai Li-gang, Hao Yu, Guo Tie-neng, et al. Method of extracting normal static stiffness of bolted joint interfaces[J]. Journal of Vibration and Shock, 2014,33(16):18-23.
[4] 蔡力钢,王锋,李玲,等. 栓接结合部动态特性研究进展[J]. 机械工程学报,2013,49(9):158-168.
Cai Li-gang, Wang Feng, Li Ling, et al. Review on dynamic properties of bolted joints[J]. Journal of Mechanical Engineering, 2013,49(9):158-168.
[5] Pau M, Baldi A, Leban B. Visualization of contact areas in bolted joints using ultrasonic waves[J]. Experimental Techniques, 2008,32(4): 49-53.
[6] Mantelli M, Milanez F H, Pereira E, et al. Statistical model for pressure distribution of bolted joints[J]. Journal of Thermophysics and Heat Transfer, 2010,24(2): 432-437.
[7] Stephen J T, Marshall M B, Lewis R. An investigation into contact pressure distribution in bolted joints[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2014,228(18): 3405-3418.
[8] Kim J, Yoon J C, Kang B S. Finite element analysis and modeling of structure with bolted joints[J]. Applied Mathematical Modeling, 2007,31(5): 895-911.
[9] 田红亮,刘芙蓉,方子帆,等. 引入各向同性虚拟材料的固定结合部模型[J]. 振动工程学报,2013,26(4):561-573.
Tian Hong-liang, Liu Fu-rong, Fang Zi-fan, et al. Immovable joint surface's model using isotropic virtual material[J]. Journal of Vibration Engineering, 2013,26(4):561-573.
[10] Tian Hong-liang, Li Bin, Liu Hong-qi, et al. A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools[J]. International Journal of Machine Tools and Manufacture, 2011,51(3): 239-249.
[11] 石坤,宋俐,师俊平. 机械结合部等效材料参数建立与试验[J]. 农业机械学报,2014,45(2):297-301.
Shi Kun, Song Li, Shi Jun-ping. Establishment and experiment of mechanical joint equivalent material properties[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014,45(2): 297-301.
[12] 王磊,杜瑞,金涛,等. 螺钉连接固定结合面匹配设计研究[J]. 西安交通大学学报,2013,47(7):62-67.
Wang Lei, Du Rui, Jin Tao, et al. Matching design for bolted joints based by effective contact radius maximization[J]. Journal of Xi'an Jiaotong University, 2013, 47(7): 62-67.
[13] Marshall M B, Lewis R, Dwyer-Joyce R S. Characterisation of contact pressure distribution in bolted joints[J]. Strain, 2006,42(1): 31-43.
[14] 王书亭,李杰,刘涛,等. 机械固定结合面刚度特性建模[J]. 华中科技大学学报:自然科学版,2011,39(8):1-5.
Wang Shu-ting, Li Jie, Liu Tao, et al. Interfacial stiffness characteristic modeling of mechanical fixed joints[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011,39(8):1-5.
[15] 张学良. 机械结合面动态特性及应用[M]. 北京:中国科学技术出版社,2002.
[1] NI Ying-sheng,SUN Qi-xin,MA Ye,XU Dong,LIU Chao. Shear distribution of multi-cell corrugated steel web composite beams based on space grid analysis [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1735-1746.
[2] CHEN Ji-qing, DU Tian-ya, LAN Feng-chong. Numerical analysis of human liver biomechanical response to blunt impacts [J]. 吉林大学学报(工学版), 2018, 48(2): 398-406.
[3] WANG Teng, ZHOU Ming-ru, MA Lian-sheng, QIAO Hong-xia. Fracture grouting crack growth of collapsible loess based on fracture theory [J]. 吉林大学学报(工学版), 2017, 47(5): 1472-1481.
[4] YAN Ya-bin, WANG Xiao-yuan, WAN Qiang. Low-cycle fatigue fracture behavior of nanoscale interface [J]. 吉林大学学报(工学版), 2017, 47(4): 1201-1206.
[5] WANG Zhi-chen, GUO Nai-sheng, ZHAO Ying-hua, CHEN Zhong-da. Dynamic shear modulus prediction of asphalt mastic based on micromechanics [J]. 吉林大学学报(工学版), 2017, 47(2): 459-467.
[6] HOU Ping-ping, WANG Li-qin, BAI Ying-cun, PENG Qiu-yang, HAO Ting. Effect of grease filling amount on the performance of bearing in high speed motorized spindle [J]. 吉林大学学报(工学版), 2017, 47(2): 518-523.
[7] MENG Guang-wei, FENG Xin-yu, ZHOU Li-ming, Li Feng. Structural reliability analysis based on dimension reduction algorithm [J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.
[8] CHEN Jiang-yi, LIU Bao-yuan. Influence of fiber fracture damage on dispersion characteristic of guided wave in composite plate [J]. 吉林大学学报(工学版), 2017, 47(1): 180-184.
[9] SUN Wei, LI Jian, JIA Shi. Identification of nonlinear stiffness and damping for hard-coating composite structure [J]. 吉林大学学报(工学版), 2016, 46(4): 1156-1162.
[10] CAO Shan-shan, LEI Jun-qing. Fatigue life prediction of steel structure considering interval uncertainty [J]. 吉林大学学报(工学版), 2016, 46(3): 804-810.
[11] LI Jian-qiao, XUE Long, ZOU Meng, ZONG Wei, XIAO Jie. Terra-mechanics characters and development of Martian simulant regolith [J]. 吉林大学学报(工学版), 2016, 46(1): 172-178.
[12] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[13] WU Yue, YANG Zhi-gang, CHEN Long, KANG Xiao-tao, ZHANG Dong-wei. Simulation and experiment of piezoelectric cantilever generator with multi-modal [J]. 吉林大学学报(工学版), 2015, 45(4): 1162-1167.
[14] ZHUANG Wei-min, XIE Dong-xuan, YU Tian-ming, YU Wan-dong. Numerical simulation of hot forming of high-strength steel based on damage-phase transformation constitutive model [J]. 吉林大学学报(工学版), 2015, 45(4): 1206-1212.
[15] KE Jun, CHENG Zhi-yong, SHI Wen-ku, SHI Teng, ZHANG Yi-jing, GUO Fu-xiang. Modal analysis and structure optimization of bus floor based on floor vibration control [J]. 吉林大学学报(工学版), 2015, 45(3): 719-725.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[3] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[4] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
[5] CHEN Si-guo, JIANG Xu, WANG Jian, LIU Yan-heng, DENG Wei-wen, DENG Jun-yi. Mashup of vehicular ad-hoc network and universal mobile telecommunications system[J]. 吉林大学学报(工学版), 2013, 43(03): 706 -710 .
[6] MENG Chao, SUN Zhi-xin, LIU San-min. Multiple execution paths for virus based on cloud computing[J]. 吉林大学学报(工学版), 2013, 43(03): 718 -726 .
[7] XIAN Shu, ZHENG Jin, LU Xing, ZHANG Shi-peng. Identification approach of P2P flow based on the content redistribution model[J]. 吉林大学学报(工学版), 2013, 43(03): 727 -733 .
[8] LYU Yuan-zhi, WANG Shi-gang, YU Jue-qiong, WANG Xiao-yu, LI Xue-song. Display characteristics of one-dimensional integral imaging in virtual mode based on lenticular lens array[J]. 吉林大学学报(工学版), 2013, 43(03): 753 -757 .
[9] WANG Dan, LI Yang, NIAN Gui-jun, WANG Ke. An inhomogeneity mask for spatial watermarking[J]. 吉林大学学报(工学版), 2013, 43(03): 771 -775 .
[10] FENG Lin-han, QIAN Zhi-hong, SHANG Ke-cheng, ZHU Shuang. Improved hidden node collision avoidance strategy based on IEEE802.15.4[J]. 吉林大学学报(工学版), 2013, 43(03): 776 -780 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd