吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1142-1148.doi: 10.13229/j.cnki.jdxbgxb201604020

• Orginal Article • Previous Articles     Next Articles

Blade design and aerodynamics of MW wind turbine based on BEM theory

YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan   

  1. College of Mechanical Science and Engineering, Jilin University, Changchun 130022,China
  • Received:2015-07-07 Online:2016-07-20 Published:2016-07-20

Abstract: According the design standard of wind turbine and considering the influence of tip loss and lift-drag and other factors, Blade Element Momentum (BEM) theory was used to design the blade on a 2MW pitch-control wind turbine to meet the design requirements. To validate the aerodynamic performance of the designed wind turbine blade, full 3D numerical simulation is conducted. Simulation results show that the static pressure, flow characteristics and turbulence intensity are in accordance with the blade aerodynamic characteristics and meet the design requirements. Comparison of the blade spanwise lift-drag coefficients with the 2D results suggests that full 3D numerical simulation can more accurately reflect the aerodynamic performance.

Key words: fluid power transmission and control, MW wind turbine blade, aerodynamic performance, three-dimensional CFD numerical simulation, circle flow field

CLC Number: 

  • TK81
[1] 何显富,卢霞,杨跃进,等. 风力机设计、制造与运行[M]. 北京:化学工业出版社,2009.
[2] 胡丹梅,张志超,孙凯,等. 风力机叶片流固耦合计算分析[J].中国电机工程学报,2013, 33(17):98-104.
Hu Dan-mei, Zhang Zhi-chao, Sun Kai, et al. Computational analysis of wind turbine blades based on fluid-structure interaction[J]. Proceedings of the CSEE, 2013, 33(17):98-104.
[3] 路宽. 基于数值模拟和风洞试验的垂直轴风力机性能研究[D]. 哈尔滨:哈尔滨工业大学机电工程学院, 2012.
Lu Kuan. Research on performance of vertical axis wind turbine based on numerical simulation and wind tunnel test[D]. Harbin: School of Mechatronics Engineering, Harbin Institute of Technology, 2012.
[4] 王菲,吕剑虹,王刚. 翼型厚度对风力机叶片翼型气动特性的影响[J]. 流体机械,2011,39 (12):5-9.
Wang Fei, Lv Jian-hong, Wang Gang. Effects of airfoil thickness on airfoil aerodynamic characteristics[J]. Fluid Machinery, 2011, 39(12):5-9.
[5] Abdelsalam A M, Boopathi K, Gomathinayagam S, et al. Experimental and numerical studies on the wake behavior of a horizontal axis wind turbine[J]. Journal of Wind Engineering & Industrial Aerodynamics, 2014, 128(5):54-65.
[6] Kim B, Kim W, Lee S, et al. Developement and verification of a performance based optimal design software for wind turbine blades[J]. Renewable Energy, 2013, 54(6):166-172.
[7] Diego C, Escárpita A A, Hugo E, et al. Numerical validation of a finite element thin-walled beam model of a composite wind turbine blade[J]. Wind Energy, 2012, 15(2):203-223.
[8] Sezer-Uzol N, Long L N. 3-D time-accurate CFD simulations of wind turbine rotor flow fields[C]∥AIAA Paper, 2006-0394.
[9] Nikolaou I G, Politis E S, Chaviaropoulos P K. Modelling the flow around airfoils equipped with vortex generators using a modified 2D Navier-Stokes solver[J]. Journal of Solar Energy Engineering, 2005, 127(2): 223-233.
[10] Bazilevs Y, Hsu M C, Kiendl J, et al. 3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades[J]. International Journal for Numerical Methods in Fluids, 2011, 65(1-3):236-253.
[11] Li Y, Paik K J, Xing T, et al. Dynamic overset CFD simulations of wind turbine aerodynamics[J]. Renewable Energy, 2012, 37(1):285-298.
[12] Shen X, Zhu X, Du Z. Wind turbine aerodynamics and loads control in wind shear flow[J]. Energy, 2011, 36(3):1424-1434.
[13] 钟伟,王同光. SST湍流模型参数校正对风力机CFD模拟的改进[J]. 太阳能学报,2014,35(9): 1743-1748.
Zhong Wei, Wang Tong-guang. Improvement of CFD simulations for wind turbines by calibrating a closure constant of SST turbulence model[J]. Acta Energiae Solaris Sinica, 2014, 35(9): 1743-1748.
[14] 周茜茜. MW级风力机叶片气动特性及流固耦合特性研究[D]. 长春:吉林大学机械科学与工程学院,2015.
Zhou Qian-qian. Study on aerodynamic and fluid-structure interaction characteristics of MW wind turbine blade[D]. Changchun:College of Mechanical Science and Engineering, Jilin University, 2015.
[1] ZHANG Jian, JIANG Ji-hai, LI Yan-jie. Flow characteristics of different cone valves [J]. 吉林大学学报(工学版), 2016, 46(6): 1900-1905.
[2] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Adaptive reverse driving system based on hydraulic transformer [J]. 吉林大学学报(工学版), 2016, 46(6): 1906-1911.
[3] CHEN Jin, LI Song-lin, SUN Zhen-ye, CHEN Gang. Integrated design of aerodynamic and structural performance for wind turbine dedicated airfoil [J]. 吉林大学学报(工学版), 2016, 46(6): 1940-1945.
[4] WU Wei, DI Chong-feng, HU Ji-bin, YUAN Shi-hua. Static stiffness of hydraulic transformer controlled system [J]. 吉林大学学报(工学版), 2016, 46(4): 1130-1135.
[5] WANG Zhen-bao, QIN Si-cheng, MA Run-da. Thermal characteristic analysis in hydraulic transmission system of wheel loader [J]. 吉林大学学报(工学版), 2016, 46(4): 1136-1141.
[6] LIU Xin-hui, LI Qian-wen, CHEN Jin-shi, ZHANG Peng, NIU Ping-jie. Mathematical modeling and simulation of load-sensing priority valve [J]. 吉林大学学报(工学版), 2015, 45(6): 1817-1824.
[7] DENG Hai-shun, HUANG Kun, WANG Chuan-li, LI Yong-mei. Overturning moment of cylinder of balanced two-ring axial piston pump [J]. 吉林大学学报(工学版), 2015, 45(5): 1468-1473.
[8] WEI Wei1,YANG Zhi-dong,QU Zhi-yong2,HAN Jun-wei2. Internal force coupling control for hyper-redundant multi-axis hydraulic shaking table [J]. 吉林大学学报(工学版), 2015, 45(5): 1461-1467.
[9] MA Wen-xing, ZHANG Yan, LEI Yu-long. Design and test of control system of hydrodynamic automotive transmission for heavy vehicle [J]. 吉林大学学报(工学版), 2015, 45(5): 1455-1460.
[10] LIU Jian-fang, CHEN Hong-xia, LIU Guo-jun. Transport performance of non-contact transformation using aerostatic suspension [J]. 吉林大学学报(工学版), 2015, 45(3): 814-819.
[11] DONG Han,LIU Xin-hui,WANG Xin,ZHENG Bo-yuan,LIANG Wei-quan,WANG Jia-yi. Impact of main parameters of accumulator on parallel hydraulic hybrid [J]. 吉林大学学报(工学版), 2015, 45(2): 420-428.
[12] XU Tao, LIU Guang-jie, GE Hai-chao, ZHANG Wei, YU Zheng-lei. Modeling heat source of dynamic welding with local coordinate curve path [J]. 吉林大学学报(工学版), 2014, 44(6): 1704-1709.
[13] LI Fei-long, LIN Yong-gang, LI Wei, LIU Hong-wei, CUI Bao-ling. Energy hydraulic transmission system of wind turbine [J]. 吉林大学学报(工学版), 2014, 44(6): 1664-1668.
[14] TAN Yue, MA Wen-xing, LIU Chun-bao. Precision control on blades forming of stamping welded hydrodynamic torque converter [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 530-534.
[15] DONG Han, LIU Xin-hui, WANG Xin, CHEN Jin-shi, WANG Jia-yi, ZHENG Bo-yuan. Energy saving performance of hydraulic hybrid system with AMESim [J]. 吉林大学学报(工学版), 2013, 43(05): 1264-1270.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[3] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[4] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
[5] CHEN Si-guo, JIANG Xu, WANG Jian, LIU Yan-heng, DENG Wei-wen, DENG Jun-yi. Mashup of vehicular ad-hoc network and universal mobile telecommunications system[J]. 吉林大学学报(工学版), 2013, 43(03): 706 -710 .
[6] MENG Chao, SUN Zhi-xin, LIU San-min. Multiple execution paths for virus based on cloud computing[J]. 吉林大学学报(工学版), 2013, 43(03): 718 -726 .
[7] XIAN Shu, ZHENG Jin, LU Xing, ZHANG Shi-peng. Identification approach of P2P flow based on the content redistribution model[J]. 吉林大学学报(工学版), 2013, 43(03): 727 -733 .
[8] LYU Yuan-zhi, WANG Shi-gang, YU Jue-qiong, WANG Xiao-yu, LI Xue-song. Display characteristics of one-dimensional integral imaging in virtual mode based on lenticular lens array[J]. 吉林大学学报(工学版), 2013, 43(03): 753 -757 .
[9] WANG Dan, LI Yang, NIAN Gui-jun, WANG Ke. An inhomogeneity mask for spatial watermarking[J]. 吉林大学学报(工学版), 2013, 43(03): 771 -775 .
[10] FENG Lin-han, QIAN Zhi-hong, SHANG Ke-cheng, ZHU Shuang. Improved hidden node collision avoidance strategy based on IEEE802.15.4[J]. 吉林大学学报(工学版), 2013, 43(03): 776 -780 .