1 |
宋强,孙丹婷,章伟.纯电动车机械式自动变速器换挡非线性建模及控制[J].吉林大学学报:工学版,2021,51(3):810-819.
|
|
Song Qiang, Sun Dan-ting, Zhang Wei. Shift nonlinear modeling and control of automated mechanical transmission in pure electric vehicle[J]. Journal of Jilin University(Engineering and Technology Edition), 2021,51(3): 810-819.
|
2 |
雷勇敢,陈勇,郑大伟,等.电动车两挡自动变速器敲击噪声的仿真分析[J].机械传动,2021,45(5):114-119.
|
|
Lei Yong-gan, Chen Yong, Zheng Da-wei, et al. Simulation analysis of knocking noise of two speed automatic transmission in electric vehicle[J]. Journal of Mechanical Transmission, 2021,45(5): 114-119.
|
3 |
刘永刚,张静晨,万有刚,等.基于数据驱动的双离合器自动变速器换挡过程自适应控制[J].汽车工程,2021,43(6):891-898, 923.
|
|
Liu Yong-gang, Zhang Jing-chen, Wan You-gang, et al. Adaptive shifting control for data driven dual clutch transmission[J]. Automotive Engineering, 2021,43(6): 891-898, 923.
|
4 |
张泽,陈勇,李光鑫,等.电动汽车变速器电液控制系统总成设计及结构优化[J].工程设计学报,2021,28(3):335-343.
|
|
Zhang Ze, Chen Yong, Li Guang-xin, et al. Design and structure optimization of electro-hydraulic control system assembly of electric vehicle transmission[J]. Chinese Journal of Engineering Design, 2021,28(3): 335-343.
|
5 |
张震,尤伟强,肖利华,等.基于CANFD的智能汽车域控制器软件升级系统设计[J].中北大学学报:自然科学版,2022,43(4):321-326, 334.
|
|
Zhang Zhen, You Wei-qiang, Xiao Li-hua, et al. Design of intelligent vehicle domain controller software upgrade system based on CANFD[J]. Journal of North University of China(Natural Science Edition), 2022,43(4): 321-326, 334.
|
6 |
张友国,马天才,卢昕夕.新能源汽车电机控制器盖板模态优化与振动噪声[J].振动与冲击,2022,41(14):271-279.
|
|
Zhang You-guo, Ma Tian-cai, Lu Xin-xi. Mode optimization of the motor controller cover in a new energy vehicle and its vibration noise analysis[J]. Journal of Vibration and Shock, 2022,41 (14): 271-279.
|
7 |
刘善慧,钱颂,陶涛,等.基于ARM的机组式凹印机色组人机界面系统设计[J].包装工程,2022,43(15):258-265.
|
|
Liu Shan-hui, Qian Song, Tao Tao, et al. Design of HMI system for color group of gravure printing machine based on ARM[J]. Packaging Engineering, 2022,43(15): 258-265.
|
8 |
刘铭扬,王小松,刘昱.一种调节供电进行温度补偿的高精度时钟电路[J].电子技术应用,2021,47(5):117-121.
|
|
Liu Ming-yang, Wang Xiao-song, Liu Yu. A high-precision clock circuit with temperature compensation based on power supply regulation[J]. Application of Electronic Technique, 2021,47(5): 117-121.
|
9 |
范毓洋,邓智,李子航.机载电子跨时钟域同步电路验证及可靠性分析[J].西北工业大学学报,2022,40(2):369-376.
|
|
Fan Yu-yang, Deng Zhi, Li Zi-hang. Verification and reliability analysis of synchronizers in clock domain crossing[J]. Journal of Northwestern Polytechnical University, 2022,40(2): 369-376.
|
10 |
张健,王熙,王新忠.基于CAN总线的微波多普勒雷达测速系统研究[J].农机化研究,2022,44(12):119-123.
|
|
Zhang Jian, Wang Xi, Wang Xin-zhong. Research on velocity measurement system of microwave doppler radar based on CAN bus[J]. Journal of Agricultural Mechanization Research, 2022,44(12): 119-123.
|
11 |
周志豪,陈磊,伍翔,等.基于SMOTE-SDSAE-SVM的车载CAN总线入侵检测算法[J].计算机科学,2022,49():562-570, 801.
|
|
Zhou Zhi-hao, Chen Lei, Wu Xiang, et al. SMOTE-SDSAE-SVM based vehicle CAN bus intrusion detection algorithm[J]. Computer Science, 2022,49(Sup.1): 562-570, 801.
|
12 |
张逸,吴光强.双质量飞轮怠速敲击的能量影响因素分析与验证[J].同济大学学报:自然科学版,2021,49(8):1170-1176.
|
|
Zhang Yi, Wu Guang-qiang. Analysis and verification of energy influencing factors of dual mass flywheel idle rattle[J]. Journal of Tongji University(Natural Science), 2021,49(8): 1170-1176.
|
13 |
曾礼平,黄杰,宋立权,等.计及间隙和转矩滞回变化的双质量飞轮冲击特性及动态响应分析[J].振动与冲击,2022,41(23):330-338.
|
|
Zeng Li-ping, Huang Jie, Song Li-quan, et al. Shock characteristics and dynamic response analysis of a DMF considering clearance and hysteretic variation of torque[J]. Journal of Vibration and Shock, 2022,41(23): 330-338.
|
14 |
赵希梅,王浩林,朱文彬.基于自适应模糊控制器和非线性扰动观测器的永磁直线同步电机反馈线性化控制[J].控制理论与应用,2021,38(5):595-602.
|
|
Zhao Xi-mei, Wang Hao-lin, Zhu Wen-bin. Feedback linearization control of permanent magnet linear synchronous motor based on adaptive fuzzy controller and nonlinear disturbance observer[J]. Control Theory & Applications, 2021,38(5): 595-602.
|
15 |
靳莹,宁初明,韩寿松,等.基于Fuzzy-PID的单自由度液压实验台控制特性分析[J].机床与液压,2021,49(17):147-150.
|
|
Jin Ying, Ning Chu-ming, Han Shou-song, et al. Control characteristics analysis of one DOF hydarulic test bench based on Fuzzy-PID[J]. Machine Tool & Hydraulics, 2021,49(17): 147-150.
|