吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (04): 958-963.doi: 10.7964/jdxbgxb201304019
• paper • Previous Articles Next Articles
HU Sheng-hai1, GUO Bin1, MASONG Ming-hui2, XU Peng1
CLC Number:
| [1] Veikos N M, Freudenstein F. On the dynamic analysis of roller chain drives: part I-theory//Proceedings of the 22nd Biennial Mechanisms Conference, New York: ASME Des Eng Div Publ DE, 1992: 431-439.[2] Veikos N M, Freudenstein F. On the dynamic analysis of roller chain drives: part II-case study//Proceedings of the 22nd Biennial Mechanisms Conference, New York: ASME Des Eng Div Publ DE, 1992: 441-450.[3] Choi W, Johnson G E, Hayek S I, et al. Vibration of roller chain at low medium and high operation speeds[J]. Mechanical Engineering and Applied Mechanics, 1998, 252(1): 21-52.[4] Wang K W. On the stability of chain drive systems under periodic sprocket oscillations[J]. Journal of Vibration and Acoustics, 1992, 114(2): 119-126.[5] Wang K W. On the impact intensity of vibrating axially moving roller chains[J]. Journal of Vibration and Acoustics, 1992, 114(7): 397-403.[6] Liu S P, Wang K W, Hayek S I, et al. A global-local integrated study of roller chain meshing dynamics[J]. Journal of Sound and Vibration, 1997, 203(1): 41-62.[7] Pedersen S L, Hansen J M, Ambrosio J A C. A roller chain drive model including contact with guide-bars[J]. Multibody System Dynamics, 2004, 12(3): 285-301.[8] Xu Li-xin, Yang Yu-hu, Chang Zong-yu, et al. Dynamic modeling of a roller chain drive system considering the flexibility of input shaft[J]. Chinese Journal of Mechanical Engineering, 2010, 23(3): 367-374.[9] Xu Li-xin, Yang Yu-hu, Chang Zong-yu, et al. Modal analysis on transverse vibration of axially moving roller chain coupled with lumped mass[J]. Journal of Central South University of Technology, 2011, 18(1): 108-115.[10] Nakanishi Toshikazu, Shabana A A. Contact forces in the non-linear dynamic analysis of tracked vehicles[J]. International Journal for Numerical Methods in Engineering, 1994, 37(8): 1251-1275.[11] Zheng H, Wang Y Y, Liu G R, et al. Efficient modeling and prediction of meshing noise from chain drives[J]. Journal of Sound and Vibration, 2001, 245(1): 133-150.[12] Zheng H, Wang Y Y, Quek K P. A refined numerical simulation on dynamic behavior of roller chain drives[J]. Shock and Vibration, 2004, 11(5-6): 573-584.[13] Hu Sheng-hai, Guo Bin, Deng Kun-xiu, et al. An efficient contact analysis for roller chain//International Conference on Mechatronics and Intelligent Materials. Switzerland: Trans Tech Publications Ltd, 2011: 290-294.[14] Shabana Ahmed A. Computational Dynamics[M]. 3rd ed. New York: John Wiley& Sons Ltd, 2010: 376-399.[15] Lankarani H M, Nikravesh P E. Continuous contact force models for impact analysis in multibody systems[J]. Nonlinear Dynamics, 1994, 5(2): 193-207. |
| [1] | BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776. |
| [2] | ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786. |
| [3] | LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507. |
| [4] | WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105. |
| [5] | HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113. |
| [6] | XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123. |
| [7] | SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132. |
| [8] | YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139. |
| [9] | LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146. |
| [10] | LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780. |
| [11] | CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786. |
| [12] | LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795. |
| [13] | CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185. |
| [14] | LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204. |
| [15] | LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790. |
|