吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (3): 692-695.doi: 10.13229/j.cnki.jdxbgxb201403018

• Orignal Article • Previous Articles     Next Articles

Study on correction model of aligning large-scale machine set to its center based on bionic imaging theory with photoelectric multipoint

GAO Yi,XU Cheng-yu,CAO Guo-hua   

  1. Institute of Electromechanical Engineering, Changchun University of Science and Technology, Changchun 130022, China
  • Received:2013-04-20 Online:2014-03-01 Published:2014-03-01

RICH HTML

0   

PDF (PC)

405

Abstract: A correction model of aligning large-scale machine set to its center is proposed. The model is based on bionic imaging theory with photoelectric multipoint. A numerical partial-differentiation equation set is established based on iterative algorithm to determine the optimal adjustment of the bearing shell. The proposed model can detect and align large-scale machine set to its center. This correction model is verified by simulation experiments.

Key words: electromechanical integration technology, bionic, photoelectric, imaging theory, correction models

CLC Number: 

  • TB17
[1] Ricardo D. A CMOS optical PSD with submicrometer resolution[J]. Analog Inte-grated Circuits and Signal Processing,2007,53:109-118.
[2] Karpov S. Short time scale pulse stability of the Crab pulsar in the optical band[J]. Astrophysics and Space Science, 2007, 308:595-599.
[3] Zhang J Y. High-speed dynamic angular measurement based on position sensitive detector[J]. International Symposium on Instrumentation Science and Technology , 2004, 3:97-102.
[4] Chien H L. Application of a diffraction grating and position sensitive detectors to the measurement of error motion and angular indexing of an indexing table[J]. Precision Engineering,2005, 29 (4):440-448.
[5] Chou H C. Rethinking the three axes alignment theory for direct laryngoscopy[J]. Acta-Anaesthesiologica Scandinavica, 2001, 45 ( 2): 261-266.
[6] Chellappan N, Buckman A Bruce, Vishniac I B. Noise analysis for position sensitive detectors[J]. IEEE Transactions on Instrumentation and Measurement, 1997, 46(5):1137-1144.
[7] Knapp W. Measurement uncertainty and machine tool testing[J]. Annals of the CIRP,2002,51(l): 459-462.
[8] Khan S A. Development of a position sensitive detector telescope for ERDA based on-line monitoring of swift heavy ions induced modifications[J]. Nuclear Instruments & Methods in Physics Research Section B,2008, 266( 8):1912-1917.
[9] Jywe W Y. Development of a three -dimensional contouring measuring system and error compensation method for a CNC machine tool[J]. Proceedings of the Institution of Mechanical Engineers Part B Engineering Manufacture,2007, 221 ( 12): 1755-1761.
[10] Lai X Y.Adaptive control of machining process based on extended entropy square error and wavelet neural network[J]. Journal of Harbin Institute of Technology, 2007,14 (3):349-353.
[11] 任露泉,孙少明,徐成宇.鸮翼前缘非光滑形态消声降噪机理研究[J].吉林大学学报:工学版,2008,38(增刊):126-131.
Ren Lu-quan, Sun Shao-ming, Xu Cheng-yu. Noise reduction mechanism of non -smooth leading edge of owl wing[J]. Journal of Jilin University(Engineering and Technology Edition),2008,38 (sup.): 126-131.
[12] Liu Y, Liu J D, Li S Y, et al. Biomimetic superhydrophobic surface of high adhesion fabricated with micronano binary structure on aluminum alloy[J]. ACS Applied Materials Interfaces, 2013, 5:8907-8914.
[13] Qian Z H , Hong Y, Xu C Y, et al. A biological coupling extension model and coupling element identification[J]. Journal of bionic engineering, 2009, 6(2), 186-195.
[14] 任露泉,梁云虹.耦合仿生学[M].北京:科学出版社,2012.
[1] XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3] TIAN Wei-jun, WANG Ji-yue, LI Ming, ZHANG Xing-wang, ZHANG Yong, CONG Qian. Observation of locomotion of water strider towards water strider robot [J]. 吉林大学学报(工学版), 2018, 48(3): 812-820.
[4] LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[5] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[6] TAN Li-dong, LIU Dan, LI Wen-jun. Design of bionic compound eye array for traffic accident scene panorama based on fly compound eye [J]. 吉林大学学报(工学版), 2017, 47(6): 1738-1744.
[7] JIN Chao-qiong, ZHANG Bao, LI Xian-tao, SHEN Shuai, ZHU Feng. Friction compensation strategy of photoelectric stabilized platform based on disturbance observer [J]. 吉林大学学报(工学版), 2017, 47(6): 1876-1885.
[8] TIAN Li-mei, WANG Yang-jun, LI Zi-yuan, SHANG Yan-geng. Development of drag-reduction test system of bionic functional surfaces with internal flow [J]. 吉林大学学报(工学版), 2017, 47(4): 1179-1184.
[9] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[10] HUANG Han, LI Jian-qiao, CHEN Bai-chao, WU Bao-guang, ZOU Meng. Experiment of impact performance of space lander footpad [J]. 吉林大学学报(工学版), 2017, 47(4): 1194-1200.
[11] WANG Ying, LI Jian-qiao, ZHANG Guang-quan, HUANG Han, ZOU Meng. Mechanical characteristics of bionic walking foot in different media [J]. 吉林大学学报(工学版), 2017, 47(2): 546-551.
[12] GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[13] LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[14] LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[15] LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[2] ZHOU Feng-dao, WANG Jin-yu, TANG Hong-zhong, ZHANG He, ZHOU Ji-yu. Multi-frequency digital drive signal generation technology in near surface electromagnetic detection domain[J]. 吉林大学学报(工学版), 2013, 43(03): 682 -687 .
[3] OUYANG Ji-hong, WANG Zhen-xin, JING Li. Expanding 9-intersection model with metric relations[J]. 吉林大学学报(工学版), 2013, 43(03): 695 -700 .
[4] GUO Tie-liang, ZHAO Dan-feng, YANG Da-wei. Efficient Doppler estimation for UWA OFDM systems[J]. 吉林大学学报(工学版), 2013, 43(03): 813 -818 .
[5] HE Yao, LIU Xing-tao, ZHANG Chen-bin, CHEN Zong-hai. Insulation detection algorithm for high-power battery system based on internal resistance model[J]. 吉林大学学报(工学版), 2013, 43(05): 1165 -1170 .
[6] LI Zhi-bin, JIN Mao-jing, LIU Pan, XU Cheng-cheng. Evaluation of impact variable speed limits on improving traffic efficiency on freeways[J]. 吉林大学学报(工学版), 2013, 43(05): 1204 -1209 .
[7] YUAN Zhe, MA Wen-xing, LIU Chun-bao, LIU Hao. Temperature field analysis of the open-type hydrodynamic retarder of heavy vehicle[J]. 吉林大学学报(工学版), 2013, 43(05): 1271 -1275 .
[8] SUI Zhou, CAI Zhong-yi, LAN Ying-wu, LI Ming-zhe. Shape control model for three-dimensional surface part in continuous flexible forming process[J]. 吉林大学学报(工学版), 2013, 43(05): 1302 -1306 .
[9] YANG Xiao-jun, SONG Qing-song, MA Xiang, LI Dong-hai. Fault-tolerance target tracking based on multi-model information filtering[J]. 吉林大学学报(工学版), 2013, 43(05): 1381 -1385 .
[10] WU Wen, MENG Xiang-ru, LIU Yun-jiang, HUO Xing-lin. Modeling and quantification of network survivability based on continuous time Markov[J]. 吉林大学学报(工学版), 2013, 43(05): 1395 -1400 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd