吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 1038-1043.doi: 10.13229/j.cnki.jdxbgxb201604004

• Orginal Article • Previous Articles     Next Articles

Anti-rollover control strategy of bus based on electronically controlled braking system

ZHENG Hong-yu1, YANG Shuo1, WEN Liang-hu2, CHEN Guo-ying1, CHEN Yu-chao3   

  1. 1.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022 China;
    2.Jiuquan Satellite Lanch Center, Jiuquan 736200,China;
    3.R&D Center, FAW Group Corporation,Changchun 130011, China
  • Received:2015-04-20 Online:2016-07-20 Published:2016-07-20

RICH HTML

0   

PDF (PC)

125

Abstract: The anti-rollover control methods of commercial vehicles were analyzed first. Then, an active anti-rollover control strategy was proposed based on the Electronically Controlled Braking System (ECBS) of bus. A simplified 3D dynamic model of the bus was established to identify the roll dangerous working condition by Lateral-load Transfer Rate (LTR). Roll compensation torque was generated by a braking force distribution strategy on the wheels to keep the roll stability. A hardware-in-the-loop simulation test bench of ECBS system was established to verify the proposed active anti-rollover control strategy. Experiment results show that the proposed strategy can effectively improve the roll safety of bus and prevent excessive LTR and roll angle.

Key words: vehicle engineering, electronically braking system, anti-rollover control, lateral-load transfer rate

CLC Number: 

  • U463.5
[1] Viano D C,Parentau C S. Rollover crash sensing and safety overview[C]∥SAE Paper,2004-01-0342.
[2] 公安部交通管理局. 中华人民共和国道路交通事故统计年报(2011年度)[M]. 北京:北京交通大学出版社,2012.
[3] 张不扬, 宗长富, 王德平. 车辆侧翻预警研究现状与关键技术[J]. 汽车技术,2010(8):27-31.
Zhang Bu-yang, Zong Chang-fu, Wang De-ping. Status of research and key technology of vehicle ro-
4 olover warning system[J]. Automobile Technology,2010(8):27-31.
[4] Rajamani R, Piyabongkarn D. New paradigms for the integration of yaw stability and rollover prevention functions in vehicle stability control[J]. IEEE Transactions on Intelligent Transportation Systems, 2013,14(1):249-261.
[5] Imine H, Fridman L M, Madani T. Steering control for rollover avoidance of heavy vehicles[J]. IEEE Transactions on Vehicular Technology,2012,61(8):3499-3509.
[6] Hickman J S, Guo F, Camden M C, et al. Efficacy of roll stability control and lane departure warning systems using carrier-collected data[J]. Journal of Safety Research,2015,52(2):59-63.
[7] Hasagasioglu S, Kilicaslan K, Atabay O, et al. Vehicle dynamics analysis of a heavy-duty commercial vehicle by using multibody simulation methods[J]. International Journal of Advanced Manufacturing Technology,2012,60(5):825-839.
[8] Markkula G, Benderius O, Wolff K, et al. Effects of experience and electronic stability control on low friction collision avoidance in a truck driving simulator[J]. Accident Analysis & Prevention,2013, 50(3):1266-1277.
[9] 麦莉, 宗长富, 高越, 等. 重型半挂车侧倾稳定性仿真与分析[J]. 吉林大学学报:工学版,2008,38 (增刊2):5-10.
Mai Li, Zong Chang-fu, Gao Yue, et al. Simulation and analysis of roll stability for heavy tractor semi-trailers[J]. Journal of Jilin University (Engineering and Technology Edition),2008,38(Sup.2):5-10.
[10] 陈建国, 程军圣, 聂永红, 等. 转向工况下车辆主动悬架的侧倾控制[J]. 汽车工程,2014,36(5):616-620.
Chen Jian-guo, Cheng Jun-sheng, Nie Yong-hong, et al. Roll control of vehicle active suspension under steering condition[J]. Automotive Engineering,2014,36(5):616-620.
[11] Yoon J, Kim D, Yi K. Design of a rollover index-based vehicle stability control scheme[J]. Vehicle System Dynamics,2007,45(5):459-475.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[3] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[4] WANG Guo-lin, FU Nai-ji, ZHANG Jian, PEI Zi-rong. Simulation of the radial tire curing process based on K-R kinetic model[J]. 吉林大学学报(工学版), 2013, 43(03): 659 -664 .
[5] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
[6] CHEN Si-guo, JIANG Xu, WANG Jian, LIU Yan-heng, DENG Wei-wen, DENG Jun-yi. Mashup of vehicular ad-hoc network and universal mobile telecommunications system[J]. 吉林大学学报(工学版), 2013, 43(03): 706 -710 .
[7] MENG Chao, SUN Zhi-xin, LIU San-min. Multiple execution paths for virus based on cloud computing[J]. 吉林大学学报(工学版), 2013, 43(03): 718 -726 .
[8] XIAN Shu, ZHENG Jin, LU Xing, ZHANG Shi-peng. Identification approach of P2P flow based on the content redistribution model[J]. 吉林大学学报(工学版), 2013, 43(03): 727 -733 .
[9] LYU Yuan-zhi, WANG Shi-gang, YU Jue-qiong, WANG Xiao-yu, LI Xue-song. Display characteristics of one-dimensional integral imaging in virtual mode based on lenticular lens array[J]. 吉林大学学报(工学版), 2013, 43(03): 753 -757 .
[10] WANG Dan, LI Yang, NIAN Gui-jun, WANG Ke. An inhomogeneity mask for spatial watermarking[J]. 吉林大学学报(工学版), 2013, 43(03): 771 -775 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd