吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1207-1216.doi: 10.13229/j.cnki.jdxbgxb201704028

• 论文 • 上一篇    下一篇

混合动力汽车启停非线性控制器设计

胡云峰1, 2, 3, 顾万里2, 梁瑜2, 杜乐2, 于树友1, 2, 陈虹1, 2   

  1. 1.吉林大学 汽车仿真与控制国家重点实验室,长春 130022;
    2.吉林大学 通信工程学院,长春 130022;
    3.吉林大学 工程仿生教育部重点实验室,长春 130022
  • 收稿日期:2015-07-10 出版日期:2017-07-20 发布日期:2017-07-20
  • 通讯作者: 于树友(1974-),男,副教授,博士.研究方向:非线性控制,预测控制.E-mail:yushuyou@126.com
  • 作者简介:胡云峰(1983-),男,讲师,在站博士后.研究方向:发动机控制.E-mail:huyf@jlu.edu.cn
  • 基金资助:

    国家自然科学基金项目(615201106008,61374046,61573165).

Start-stop control of hybrid vehicle based on nonlinear method

HU Yun-feng1, 2, 3, GU Wan-li2, LIANG Yu2, DU Le2, YU Shu-you1, 2, CHEN Hong1, 2   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.College of Communication Engineering, Jilin University, Changchun 130022, China;
    3.Key Laboratory of Bionic Engineering Ministry of Education, Changchun 130022,China
  • Received:2015-07-10 Online:2017-07-20 Published:2017-07-20

摘要:

在对混合动力汽车启停运行机理分析的基础上,建立了能够反映启停过程的发动机瞬态动力学特性的AMESim仿真模型;然后,根据发动机启停系统工作原理,将混合动力汽车的启停控制问题转换成转速跟踪控制问题,并推导了简化的面向控制的电机与发动机系统耦合模型;针对系统的非线性特性,设计了非线性三步法启停控制器,并通过输入到状态稳定理论证明了闭环系统的鲁棒稳定性。最后,通过AMEsim和MATLAB/Simulink联合仿真验证了非线性三步法启停控制器的有效性和鲁棒性,实现了混合动力汽车的快速、平稳启停。

关键词: 自动控制技术, 车辆工程, 启停控制, 混合动力汽车, 非线性三步法, 鲁棒性

Abstract:

First,the start-stop operation mechanism of hybrid vehicle is analyzed, and an AMESim simulation model is established, which can reflect the transient dynamics of the start-stop process. Second, according to the working principle of the engine start-stop system, the start-stop control problem is described as a speed tracking problem, and a simplified control-oriented model of the engine and motor coupling is proposed. Third, based on the nonlinear characteristics of the system, a nonlinear triple-step controller is designed, and the robust stability of the closed-loop system is analyzed using the input to state stability theory. Finally, the effectiveness and robustness of the triple-step controller is tested by co-simulation with AMESim and MATLAB/Simulink. Results show that the proposed control system can achieve fast and smooth start-stop of the engine.

Key words: automatic control technology, vehicle engineering, start-stop control, hybrid electric vehicle, nonlinear triple-step, robustness

中图分类号: 

  • TP273
[1] 黄开胜, 金振华, 张云龙. 并联混合动力车汽油发动机的起动和暖机过程研究[J]. 内燃机工程, 2007, 28(2): 6-9.
Huang Kai-sheng, Jin Zhen-hua, Zhang Yun-long. Investigation of gasoline engine cold-start and warm-up for parallel hybrid electric vehicle[J]. Chinese Internal Combustion Engine Engineering, 2007, 28(2): 6-9.
[2] 逯家鹏, 李幼德, 吕景华, 等. BSG怠速起停系统车辆控制策略研究[J]. 农业机械学报, 2016, 47(2): 316-322.
Lu Jia-peng, Li You-de, Lv Jing-hua, et al. Control strategy of BSG vehicle idling start-stop system[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(2): 316-322.
[3] Morra E P, Spessa E, Venditti M. Optimization of the operating strategy of a BAS hybrid diesel power train on type-approval and real-world representative driving cycles[C]//ASME Internal Combustion Engine Division Spring Technical Conference, Torino, Italy, 2012: 557-568.
[4] Radim D, Vaclav S, Zdenek P. Start-stop system for a city bus based on model predictive control[C]//The 40th Annual Conference of Industrial Electronics Society,Dallas, USA, 2014: 3973-3978.
[5] 于水. 混合动力汽车汽油机起动工况瞬态燃烧和排放特性研究[D]. 上海:上海交通大学机械与动力工程学院, 2009.
Yu Shui. The study of characteristics of transient combustion and emissions during gasoline engine start for HEV application[D]. Shanghai:College of Power Mechinery and Engineering, Shanghai Jiaotong University, 2009.
[6] 张博, 李君, 杨世春, 等. 混合动力汽车发动机起停控制策略[J]. 吉林大学学报:工学版, 2009, 39(3): 561-565.
Zhang Bo, Li Jun, Yang Shi-chun, et al. Control strategy for engine start-stop in hybrid electric vehicle[J]. Journal of Jilin University(Engineering and Technology Edition), 2009, 39(3): 561-565.
[7] Li T, Deng K Y, Peng H Y. Independent fuel injection strategy based on the initial piston positions for HEV engine quick start[J]. Elsevier Fuel, 2014, 117: 733-741.
[8] 王云开, 于秀敏, 梁金广, 等. 电控柴油机冷起动过程的控制策略[J]. 吉林大学学报:工学版, 2008, 38(1): 27-31.
Wang Yun-kai, Yu Xiu-min, Liang Jin-guang, et al. Control strategy of electronic controlled diesel engine during cold start process[J]. Journal of Jilin University (Engineering and Technology Edition), 2008, 38(1): 27-31.
[9] 梁金广, 于秀敏, 高跃, 等. 起动电压对电控柴油机起动性能的影响[J]. 吉林大学学报:工学版, 2009, 39(2): 315-320.
Liang Jin-guang, Yu Xiu-min, Gao Yue, et al. Influence of battery voltage on start behavior of electronically controlled diesel engine[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(2): 315-320.
[10] Canova M, Guezennec Y, Yurkovich S. On the control of engine start/stop dynamics in a hybrid electric vehicle[J]. Journal of Dynamic Systems, Measurement,and Control, 2009, 131(6): 061005.
[11] Hendricks E, Sorenson S. Mean value modeling of spark ignition engines[C]//SAE Paper, 900616.
[12] Ramos J I. Internal Combustion Engine Modeling[M]. New York: Hemisphere Publishing Corporation, 1989.
[13] Guzzlla L, Onder C. Introduction to Modeling and Control of Internal Combustion Engine Systems[M]. Dordrecht: Springer Science & Business Media, 2009.
[14] Karim G A. A review of combustion processes in the dual fuel engine―the gas diesel engine[J]. Progress in Energy and Combustion Science, 1980, 6(3): 277-285.
[15] Canova M, Porembski J, Sevel K. Model based control for diesel engine start-stop operations with a belted starter/alternator[C]//ASME International Mechanical Engineering Congress and Exposition, Seattle, USA, 2007: 97-104.
[16] Moskwa J J, Wang W, Bucheger D J. A new methodology for use in engine diagnostics and control, utilizing' synthetic' engine variables: theoretical and experimental results[J]. Journal of Dynamic Systems, Measurement, and Control (Transactions of the ASME), 2001, 123(3): 528-534.
[17] Chen H, Gong X, Liu Q F. Triple-step method to design non-linear controller for rail pressure of gasoline direct injection engines[J]. IET Control Theory & Applications, 2014, 8(11): 948-959.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 顾万里,王萍,胡云峰,蔡硕,陈虹. 具有H性能的轮式移动机器人非线性控制器设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1811-1819.
[7] 李战东,陶建国,罗阳,孙浩,丁亮,邓宗全. 核电水池推力附着机器人系统设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1820-1826.
[8] 赵爽,沈继红,张刘,赵晗,陈柯帆. 微细电火花加工表面粗糙度快速高斯评定[J]. 吉林大学学报(工学版), 2018, 48(6): 1838-1843.
[9] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[10] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[11] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[12] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[13] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[14] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[15] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!