吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (1): 65-73.doi: 10.13229/j.cnki.jdxbgxb20161207

• 论文 • 上一篇    下一篇

自然暴露下汽车座椅热负荷的数值模拟及试验

兰凤崇1, 2, 黄佳楠1, 2, 陈吉清1, 2, 李丽芬1, 2   

  1. 1.华南理工大学 机械与汽车工程学院, 广州 510640;
    2. 华南理工大学 广东省汽车工程重点实验室,广州 510640
  • 收稿日期:2016-11-09 出版日期:2018-02-26 发布日期:2018-02-26
  • 通讯作者: 陈吉清(1966-),女,教授,博士生导师. 研究方向:车身结构与安全技术. E-mail:chjq@scut.edu.cn
  • 作者简介:兰凤崇(1959-),男,教授,博士生导师. 研究方向:车身结构与安全技术. E-mail:fclan@scut.edu.cn
  • 基金资助:
    国家自然科学基金项目(51375170); 广州市科技计划项目(201504010020,201707020045); 工业产品环境适应性国家重点实验室开放基金项目

Numerical simulation and experiment on thermal load of vehicle seats under natural exposure

LAN Feng-chong1, 2, HUANG Jia-nan1, 2, CHEN Ji-qing1, 2, LI Li-fen1, 2   

  1. 1.School of Mechanical and Automotive Engineering, South China University of Technology,Guangzhou 510640,China;
    2.Guangdong Provincial Key Laboratory of Automotive Engineering, South China University of Technology, Guangzhou 510640,China
  • Received:2016-11-09 Online:2018-02-26 Published:2018-02-26

RICH HTML

0   

PDF (PC)

394

摘要： 针对汽车内乘员热舒适性问题,为分析自然暴露下汽车舱内座椅的热负荷变化规律及其影响因素,首先在我国海南省琼海市湿热自然环境试验站对某款国产黑色轿车进行自然暴露试验,测试分析了1年内试验车辆内、外的热环境变化。采用热网格法对整车模型进行热负荷分析,仿真得到舱内座椅传热过程中各传热方式的热流量变化,并进一步研究了座椅表面材料特性、车窗玻璃、汽车停放环境等因素对座椅表面温度场的影响规律。结果表明:汽车座椅主要受太阳辐射作用而升温,升温机理依次为表面辐射、热传导和对流散热;合理改变座椅表面材料吸收率、汽车车窗玻璃的透射率和汽车的停放位置,可以有效降低汽车舱内车座椅的表面温度,从而改善其热负荷状况。

关键词: 车辆工程, 热负荷, 热网格法, 座椅, 太阳辐射

Abstract: To solve the problem of thermal comfort of passengers, experiment research was conducted in Qionghai, Hainan Province of China, to analyze the rule of thermal load of vehicle seats and the influencing factors. In the experiment, a black domestic car was exposed to extreme hot and humid climate, and the parameters of the thermal environment around the car were recorded. The thermal grid numerical method, which is characterized by high efficiency and accuracy in the analysis of the wall temperature of vehicles, was adopted to analyze the thermal load of the whole vehicle model. The change of heat flux during heat transfer process was analyzed by simulation, and the effects of the thermal properties of vehicle seats, transmittance of the glass window, the parking location and other factors on the surface temperature of the vehicle seats were investigated. The results indicate that, reasonable selections of the thermal properties of the seats, the transmittance of the front windshield and the parking site can effectively reduce the surface temperature of the seats, thus, improving the thermal load condition.

Key words: vehicle engineering, thermal load, thermal grid numerical method, vehicle seats, solar radiation

中图分类号: 

  • U463.83
[1] QC/T 728-2005. 汽车整车大气暴露试验方法[S].
[2] ASTM G24-1997. Standard practice for conducting exposures to daylight filitered through glass[S].
[3] SAEJ2229-1993. Accelerated exposure of automotive interior trim materials using an outdoor under class variable angled controlled temperature apparatus[S].
[4] 童灵,陈久芝.轿车空调车室内太阳辐射能量再分配的数值计算[J].上海汽车,1997(10):21-23.
Tong Ling, Chen Jiu-zhi.Numerical calculation of indoor solar radiation energy redistribution in air-conditioned car[J]. Shanghai Auto, 1997(10):21-23.
[5] Torregrosa-Jaime B, Bjurling F,Corberan J M.Transient thermal model of a vehicle's cabin validated under variable ambient conditions[J]. Applied Thermal Engineering,2015,75:45-53.
[6] 田凯. 汽车空调系统对乘员舱热舒适性影响的分析与研究[D]. 广州:华南理工大学机械与汽车学院,2012.
Tian Kai.Analysis and research of the effects of air conditioning systems on the thermal comfort of cab[D].Guangzhou: School of Mechanical & Automotive Engineering,South China University of Technology,2012.
[7] Cengiz T G, Babalık F C.An on-the-road experiment into the thermal comfort of car seats[J]. Applied Ergonomics,2007,38(3):337-347.
[8] Vivek P A, Abdul N, Nagpurwala Q H.Numerical studies on effect of cooling vent setting and solar radiation on air flow and temperature distribution in a passenger car[C]∥SAE Paper,2009-28-0048.
[9] Al-Kayiem H H, Sidik M F B M,Munusammy Yuganthira R A L. Study on the thermal accumulation and distribution inside a parked car cabin[J]. American Journal of Applied Sciences,2010,7(6):784-789.
[10] 张文灿. 汽车乘坐空间热环境与乘员热舒适性分析关键技术研究[D]. 广州:华南理工大学机械与汽车工程学院,2013.
Zhang Wen-can.Study on the key technology of thermal environment and occupant’s thermal comfort analysis in vehicle cabins [D]. Guangzhou: School of Mechanical & Automotive Engineering,South China University of Technology,2013.
[11] ASHRAE. Handbook of Fundamentals[M]. Atlanta: American Society of Heating, Refrigerating, and Air-Conditioning Engineers Inc, 2005.
[12] Mcadams W H.Heat Transmission[M]. New York: McGraw-Hill,1994.
[13] Cengel Yunus A, Boles Michael A.Thermodynamics an Engineering Approach[M]. New York: McGraw-Hill,1998:92-95.
[14] 张文灿,陈吉清,兰凤崇. 太阳辐射下车窗玻璃特性对车内温度场的影响研究[J]. 机械工程学报,2011,47(22):119-125.
Zhang Wen-can, Chen Ji-qing, Lan Feng-chong.Research on windshield glazing property effect on vehicle cabin temperature under solar radiation[J]. Chinese Journal of Mechanical Engineering,2011,47(22):1119-125.
[15] 崔耀平,刘纪远,张学珍.城市不同下垫面的能量平衡及温度差异模拟[J]. 地理研究,2012,31(7):1257-1268.
Cui Yao-ping, Liu Ji-yuan, Zhang Xue-zhen.Energy balance and temperature difference simulation of different urban underlying[J]. Geographical research,2012,31(7):1257-1268.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发