吉林大学学报(工学版)

• • 上一篇    下一篇

后悬架非对称式橡胶衬套弹性耦合特性

郭孔辉;王爽;丁海涛;张建伟   

  1. 吉林大学 汽车动态模拟国家重点实验室,长春 130022
  • 收稿日期:2007-03-25 修回日期:2007-06-25 出版日期:2007-11-01 发布日期:2007-11-01
  • 通讯作者: 郭孔辉

Elastic coupling characteristic of unsymmetrical rubber bushings of rear suspension

Guo Kong-hui;Wang Shuang;Ding Hai-tao;Zhang Jian-wei   

  1. State Key Laboratory of Automobile Dynamic Simulation, Jilin University, Changchun 130022, China
  • Received:2007-03-25 Revised:2007-06-25 Online:2007-11-01 Published:2007-11-01

摘要: 非对称式橡胶衬套在轴向和对称径向存在弹性耦合特性,对汽车的操纵稳定性有一定的影响。采用专用卡具在压力试验台上测量了非对称式橡胶衬套的力与位移特性。基于试验数据,采用三向耦合的弹簧阻尼系统表达了其弹性耦合特性,并在ADAMS/View虚拟样车模型中进行了相关仿真试验。与传统橡胶衬套相比,非对称式橡胶衬套能够产生随动转向,提高汽车操纵稳定性。

关键词: 车辆工程, 非对称式橡胶衬套, 弹性耦合特性, 随动转向

Abstract: The elastic coupling characteristics of the unsymmetrical rubber bushing in the axial and symmetrical radial directions, affect the handling stability of the vehicle. The forcedisplacement characteristics of an unsymmetrical rubber bushing were measured on a press test rig with a customized fixture. The elastic coupling characteristics were expressed by a threedirection coupling springdamping system based on the test data, and its simulation was performed with an ADAMS/View virtual vehicle prototype model. Compared with the traditional rubber bushing, the unsymmetrical rubber bushing gives rise to a followup steering, enhances the handling stability of the vehicle.

Key words: vehicle engineering, unsymmetrical rubber bushing, elastic coupling characteristic, followup steering

中图分类号: 

  • U463.33
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!