吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (5): 1352-1357.doi: 10.13229/j.cnki.jdxbgxb201705004

Previous Articles     Next Articles

Design and analysis of braking hysteresis compensation system for commercial tractor-semitrailer

ZHU Bing1, FENG Yao1, ZHAO Jian1, WU Jian1, WANG Peng-fei2, WANG Chang3   

  1. 1.State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2.FAW Jiefang Automotive Co., Ltd., Changchun 130011, China;
    3.College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2016-08-25 Online:2017-09-20 Published:2017-09-20

Abstract: A braking hysteresis compensation system for commercial tractor-semitrailer was designed and analyzed. A test bench of the commercial tractor-semitrailer braking system was set up, and the braking hysteresis characteristics of the tractor-semitrailer was tested. According to the analysis results of the causes of the braking hysteresis of the tractor-semitrailer, a set of electronic controlled braking hysteresis compensation system was designed. The tests were carried out based on the hardware in the loop simulation platform under the typical working conditions. The results show that the braking hysteresis compensation system can shorten the braking hysteresis of the trailer effectively, and improve the overall performance of the tractor-semitrailer.

Key words: vehicle engineering, commercial tractor-semitrailer, brake hysteresis, hysteresis compensation system

CLC Number: 

  • U463
[1] 中华人民共和国国家统计局.2015年国民经济和社会发展统计公报[R]. 北京:国家统计局,2016.
[2] 韩正铁.商用车电控制动系统迟滞特性及补偿控制策略研究[D]. 长春:吉林大学汽车工程学院,2014.
Han Zheng-tie. Research on hysteresis characteristic and compensation control strategy of EBS for commercial vehicle[D].Changchun: College of Automotive Engineering, Jilin University, 2014.
[3] Bayan F P, Cornetto A D, Dunn A, et al. Brake timing measurements for a tractor-semitrailer under emergency braking[J]. SAE International Journal of Commercial Vehicles, 2010,2(2):245-255.
[4] Neuhaus D, Willms J. Vehicle dynamics-continuous improvements in vehicle safety from ABS to electronic stability control[C]∥SAE Paper, 2005.
[5] Limpert R. An investigation of the brake force distribution on tractor-semitrailer combinations[C]∥SAE Paper, 1971.
[6] Zheng H, Hu J, Ma S. Research on simulation and control of differential braking stability of tractor semi-trailer[C]∥SAE Paper, 2015.
[7] Amato W P, Bennett M A. Verification of heavy truck EBS and ABS using matrix hardware in the loop tools[C]∥SAE Paper, 1999.
[8] Abbaspour M, Chapman K S, Glasgow L A. Transient modeling of non-isothermal, dispersed two-phase flow in natural gas pipelines[J]. Applied Mathematical Modelling, 2010, 34(2): 495-507.
[9] 何力.基于多领域建模的重卡制动系统动力学研究[D].武汉:华中科技大学机械学院,2011.
He Li. Research on dynamics of heavy truck brake system based on the multi-domain modeling[D]. Wuhan: College of Mechanical Engineering, Huazhong University of Science and Technology, 2011.
[10] 覃涛. 客车气压制动系统时延分析及其控制技术研究[D]. 武汉:武汉理工大学机电工程学院,2012.
Qin Tao. Research on delay time analysis and its control techniques of bus pneumatic braking system[D]. Wuhan: School of Mechatronic Engineering, Wuhan University of Technology, 2012.
[11] 郑宏宇, 杨硕, 文良浒,等. 基于电控制动系统的客车防侧翻控制策略[J].吉林大学学报:工学版,2016, 46(4):1038-1043.
Zheng Hong-yu, Yang Shuo, Wen Liang-hu, et al. Anti-rollover control strategy of bus based on electronically controlled braking system[J]. Journal of Jilin University (Engineering and Technology Edition), 2016, 46(4):1038-1043.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .