吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (04): 976-982.doi: 10.7964/jdxbgxb201304022

• 论文 • 上一篇    下一篇

仿生越沙杖结构设计及性能数值分析

张锐, 张四华, 刘芳, 李建桥   

  1. 吉林大学 工程仿生教育部重点实验室,长春 130022
  • 收稿日期:2012-06-14 出版日期:2013-07-01 发布日期:2013-07-01
  • 作者简介:张锐(1975-),男,副教授,博士.研究方向:松软地面仿生行走及数值计算.E-mail:zhangrui@jlu.edu.cn
  • 基金资助:

    国家自然科学基金项目(51275199).

Structure design and performance analysis of bionic desert hiking stick

ZHANG Rui, ZHANG Si-hua, LIU Fang, LI Jian-qiao   

  1. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022,China
  • Received:2012-06-14 Online:2013-07-01 Published:2013-07-01

RICH HTML

0   

PDF (PC)

290

摘要：

基于鸵鸟足结构形貌及越沙机制,以鸵鸟足为生物原型,通过对杖托进行仿生设计,研制了一种仿生越沙杖。该仿生杖托能够根据仿生杖的垂直荷载和沙土的软硬程度自动改变结构以及杖托/沙土接触面积。采用离散元软件PFC2D®,对仿生越沙杖入沙过程中触沙初始状态、承载中间状态和极限承载状态进行了数值模拟,并与普通越沙杖杖托下接触力场、速度场、沉陷量和承载力的模拟结果进行了对比,结果表明仿生越沙杖具有优越的固沙限流、抗沉陷和高承载性能。

关键词: 工程仿生学, 鸵鸟二趾足, 仿生越沙杖, 固沙限流, 数值模拟

Abstract:

As an auxiliary tool for traveling, hiking stick is very useful for travelers, in particularly for desert hiking. A bionic desert hiking stick was developed inspired by the structure, morphology and excellent travelling mechanism of ostrich foot on sand. This design has a stick tray on the tip that mimics the foot pad of ostrich, which possesses excellent characteristics of san fixation and anti-sinkage. The structure of the bionic stick tray and the contacting area between the tray and sand could be automatically adjusted with the changes of vertical load of the stick and the rigidity of sand. Using Discrete Element Method (DEM) software PFC2D®, the interaction between the bionic stick and sand at three different work states, including the initial contacting sand state, the middle load bearing state and the ultimate load bearing state, were numerically investigated. Simulation results show that, compared with common desert hiking sticks, the bionic hiking stick possesses the excellent characteristics of sand flow fixation, anti-sinkage and high load bearing capacity.

Key words: bionic engineering, didactyl foot of ostrich, bionic hiking stick on sand, sand flow fixation, numerical simulation

中图分类号: 

  • TB17

[1] Jacobson B H, Caldwell B, Kulling F A. Comparison of hiking stick use on lateral stability while balancing with and without a load[J]. Perceptual and Motor Skills, 1997, 85: 347-350.

[2] 任露泉,梁云虹. 生物耦合生成机制[J]. 吉林大学学报:工学版,2011,41(5):1348-1357. Ren Lu-quan, Liang Yun-hong. Generation mechanism of biological coupling[J]. Journal of Jilin University (Engineering and Technology Edition), 2011, 41(5): 1348-1357.

[3] Lu Y X. Significance and progress of bionics[J]. Journal of Bionics Engineering, 2004, 1(1): 1-3.

[4] 柏龙,葛文杰,陈晓红,等. 星面探测仿生间歇式跳跃机器人设计及实现[J]. 机器人,2012(1):32-37. Bai Long, Ge Wen-jie, Chen Xiao-hong, et al. Design and implementation of a bio-inspired intermittent hopping robot for planetary surface exploration[J]. Robot, 2012(1): 32-37.

[5] 李杰,庄继德,魏东,等. 沙漠仿生轮胎与普通轮胎牵引性能的对比试验[J]. 吉林大学学报:工学版,2006,36(4):510-513. Li Jie, Zhuang Ji-de, Wei Dong, et al. Comparative traction performance tests between bionic camel foot tire and common tire[J]. Journal of Jilin University (Engineering and Technology Edition), 2006, 36(4): 510-513.

[6] Schaller N U, D'Aot K, Villa R, et al. Toe function and dynamic pressure distribution in ostrich locomotion[J]. The Journal of Experimental Biology, 2011, 214: 1123-1130.

[7] Jindrich D L, Smith N C, Jespers K, et al. Mechanics of cutting maneuvers by ostriches (Struthio camelus)[J]. The Journal of Experimental Biology, 2007, 210: 1378-1390.

[8] Arnold C. Ostriches and Other Flightless Birds[M]. Minneapolis :Lerner Pub Group, 1990.

[9] Zhang R, Zhang S H, Li X J, et al. Relationship between foot structure morphology and ostrich traveling ability on sand//Proceedings of International Bionic Engineering Conference, Boston, USA, 2011.

[10] El-Gendy S A A, Derbalah A, El-Magd M E R A. Histo-morphological study on the footpad of ostrich (Struthio camelus) in relation to locomotion[J]. Journal of Veterinary Anatomy, 2011, 4(2): 77-97.

[11] 王志浩,裘熙定,季学武. 驼足与沙地相互作用的研究[J]. 吉林工业大学学报,1995,25(2):1-7. Wang Zhi-hao, Qiu Xi-ding, Ji Xue-wu. The research of reciprocal action between camel shoe and sand[J]. Journal of Jilin University of Technology, 1995, 25(2): 1-7.

[12] 张锐,李建桥,李因武,等. 部件复杂表面影响土壤扰动行为的离散元宏细观分析[J]. 吉林大学学报:工学版,2009,39(5):1218-1223. Zhang Rui, Li Jian-qiao, Li Yin-wu, et al. DEM macroscopic and mesoscopic analysis in disturbed behavior of soil acted by part with complex surface[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(5): 1218-1223.

[13] Zhang R, Zhou G F, Chen G M, et al. Research on the nonlinear mechanical model of cohesive soil based on distinct element method[J]. Advanced Science Letters, 2011, 4(4/5): 1500-1508.
[1] 熙鹏,丛茜,王庆波,郭华曦. 仿生条纹形磨辊磨损试验及耐磨机理分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1787-1792.
[2] 郭昊添,徐涛,梁逍,于征磊,刘欢,马龙. 仿鲨鳃扰流结构的过渡段换热表面优化设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1793-1798.
[3] 宫亚峰, 王博, 魏海斌, 何自珩, 何钰龙, 申杨凡. 基于Peck公式的双线盾构隧道地表沉降规律[J]. 吉林大学学报(工学版), 2018, 48(5): 1411-1417.
[4] 田为军, 王骥月, 李明, 张兴旺, 张勇, 丛茜. 面向水上机器人的水黾运动观测[J]. 吉林大学学报(工学版), 2018, 48(3): 812-820.
[5] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] 钱志辉, 周亮, 任雷, 任露泉. 具有仿生距下关节和跖趾关节的完全被动步行机[J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[7] 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] 付文智, 刘晓东, 王洪波, 闫德俊, 刘晓莉, 李明哲, 董玉其, 曾振华, 刘桂彬. 关于1561铝合金曲面件的多点成形工艺[J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828.
[9] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[10] 王宏朝, 单希壮, 杨志刚. 地面效应模拟对环境风洞中车辆冷却系统试验影响的数值模拟[J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378.
[11] 田丽梅, 王养俊, 李子源, 商延赓. 仿生功能表面内流减阻测试系统的研制[J]. 吉林大学学报(工学版), 2017, 47(4): 1179-1184.
[12] 陈东辉, 刘伟, 吕建华, 常志勇, 吴婷, 慕海锋. 基于虾夷扇贝体表结构的玉米茬根捡拾器仿生设计[J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[13] 彭玮, 李国祥, 闫伟. 适用于发动机散热器的壁面函数改进[J]. 吉林大学学报(工学版), 2017, 47(3): 804-810.
[14] 寇淑清, 宋玮峰, 石舟. 36MnVS4连杆裂解加工模拟及缺陷分析[J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
[15] 谷诤巍, 吕萌萌, 张文学, 雷娇娇, 徐虹. 中国标准动车组前端三维蒙皮件冲压成形[J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发