吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 818-823.doi: 10.13229/j.cnki.jdxbgxb201603021

• Orginal Article • Previous Articles     Next Articles

Development of dual-entrance piezoelectric pump used in micro fluidic mixing system

LI Li-an1, DONG Jing-shi1, ZENG Ping1, CHENG Guang-ming2, WU Di1   

  1. 1.College of Mechanical Science and Technology, Jilin University, Changchun 130022, China;
    2.Institute of Precision Machinery, Zhejiang Normal University, Jinhua 321004, China
  • Received:2015-03-30 Online:2016-06-20 Published:2016-06-20

RICH HTML

0   

PDF (PC)

143

Abstract: Structure design and working principle analysis of dual-entrance piezoelectric pump were carried out, and the relationship between output flow rate and the entrance area was inferred theoretically. The testing system was built and the output performances of single-entrance piezoelectric pump and dual-entrance piezoelectric pump were tested respectively. Testing results show that the maximum flow rate against zero back pressure of the dual-entrance piezoelectric pump is increased by 77.4 mL/min compared with single-entrance piezoelectric pump. The highest output pressure against zero flow rate of the dual-entrance piezoelectric pump is increased by 1.92 kPa compared with single-entrance piezoelectric pump. It is realizable for dual-entrance piezoelectric pump to achieve two kinds of micro fluid mixing. It turns out that the dual-entrance piezoelectric pump could enhance the output performance of single chamber piezoelectric pump, realize the mixing of two kinds of micro fluid, and variable mixing of two kinds of micro fluid by controlling the driving frequency of the pump.

Key words: mechanical design, micro fluid mixing, piezoelectric pump, dual-entrance

CLC Number: 

  • TH38
[1] 荣波,李民权,黄成军,等. 一种非对称结构微流体混合器的设计与分析[J]. 微纳电子技术,2014,51(8):512-517.
Rong Bo,Li Min-quan,Huang Cheng-jun, et al. Design and analysis of an asymmetric structured microfluidc mixer[J]. Micronano Electronic Technology,2014,51(8):512-517.
[2] 郑利,张正,李丹,等. 基于声表面波技术的微流体混合及仿真[J].传感技术学报,2011,24(8):1098-1101.
Zheng Li,Zhang Zheng, Li Dan, et al. Microfluidic mixing and simulationvia surface acoustic wave driving[J]. Chinese Journal of Sensors and Actuators, 2011,24(8):1098-1101.
[3] Weng C H, Lien K Y, Yang S Y, et al. A suction-type pneumatic microfluidic device for liquid transport and mixing[J]. Microfluid Nanofluid, 2011,10(2):301-310.
[4] 赵天,杨志刚,刘建芳,等. 利用压电微泵驱动和脉动混合可控合成金纳米粒子[J]. 光学精密工程,2014,22(4):904-910.
Zhao Tian,Yang Zhi-gang, Liu Jian-fang,et al. Controlled synthesis of gold nanoparticles based on PZT micropump and pulsating mixing[J]. Optics and Precision Engineering,2014,22(4):904-910.
[5] 杨敬松,左春柽,连静,等. 基于数字微流控生物芯片的液滴调度算法[J]. 吉林大学学报:工学版,2007,37(6):1380-1385.
Yang Jing-song, Zuo Chun-cheng, Lian Jing, et al. Droplet scheduling algorithm for digital microfluidics-based biochips[J]. Journal of Jilin University (Engineering and Technology Edition), 2007,37(6):1380-1385.
[6] 黄俊,张建辉,王守印. 多级“Y”型流管无阀压电泵的原理与试验验证[J]. 光学精密工程,2013,21(2):423-430.
Huang Jun, Zhang Jian-hui, Wang Shou-yin. Theory and experimental verification on valveless piezoelectric pump with multistage Y-shape tubes[J]. Optics and Precision Engineering,2013, 21(2):423-430.
[7] 白兰,吴一辉,张平. 基于MEMS的微流体混合器的研究与进展[J]. 哈尔滨工业大学学报,2004, 36(4):543-545.
Bai Lan, Wu Yi-hui, Zhang Ping. Investigation progress of microfluidic mixers based on MEMS[J]. Journal of Harbin Institute of Technology,2004,36(4):543-545.
[8] 张建辉,曹炳鑫,陈道根,等. 半球缺阻流体无阀压电泵的实验验证[J]. 光学精密工程,2014, 22(1):76-84.
Zhang Jian-hui, Cao Bing-xin, Chen Dao-gen, et al. Experimental verification on valve-less piezoelectric pump with hemisphere-segment bluff-body[J]. Optics and Precision Engineering,2014,22(1):76-84.
[9] 程光明,何丽鹏,曾平,等. 矩形压电振子式主动阀压电泵的设计及其性能[J]. 吉林大学学报:工学版,2010,40(3):720-724.
Cheng Guang-ming, He Li-peng, Zeng Ping, et al. Design and performance of piezoelectric pump with active valve actuated by rectangular piezoelectric vibrator[J]. Journal of Jilin University (Engineering and Technology Edition),2010,40(3):720-724.
[10] Park J H, Seo M Y, Ham Y B, et al. A study on high-output piezoelectric micropumps for application in DMFC[J]. Journal of Electroceramics, 2013,30(1-2):102-107.
[11] 孙长敬,褚家如. 新型压电驱动微流体混合器实验[J]. 纳米技术与精密工程,2006,4(2):132-135.
Sun Chang-jing, Chu Jia-ru. Experimental investigation of a new piezoelectric driven microfluidic mixer[J]. Nanotechnology and Precision Engineering,2006,4(2):132-135.
[1] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[2] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[3] LIU Jian-fang, WANG Ji-bo, LIU Guo-jun, LI Xin-bo, LIANG Shi-hai, YANG Zhi-gang. PMMA micromixer embedded with 3D channel based on piezoelectric actuation [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1500-1507.
[4] WANG Tao, SAN Xiao-gang, GAO Shi-jie, WANG Hui-xian, WANG Jing, NI Ying-xue. Dynamic characteristics of vertical shaft system of photoelectric turntable [J]. 吉林大学学报(工学版), 2018, 48(4): 1099-1105.
[5] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[6] XIE Chuan-liu, TANG Fang-ping, SUN Dan-dan, ZHANG Wen-peng, XIA Ye, DUAN Xiao-hui. Model experimental analysis of pressure pulsation in vertical mixed-flow pump system [J]. 吉林大学学报(工学版), 2018, 48(4): 1114-1123.
[7] SUN Xiu-rong, DONG Shi-min, WANG Hong-bo, LI Wei-cheng, SUN Liang. Comparison of multistage simulation models of entire sucker rod with spatial buckling in tubing [J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[8] YOSHINO Tatsuo, FAN Lu-lu, YAN Lei, XU Tao, LIN Ye, GUO Gui-kai. Multiobjective optimization design for dummy chest structure based on MBNWS algorithm [J]. 吉林大学学报(工学版), 2018, 48(4): 1133-1139.
[9] LIU Kun, LIU Yong, YAN Jian-chao, JI Shuo, SUN Zhen-yuan, XU Hong-wei. Dynamic analysis of sit-to-stand human motion based on in vitro-sensor detection [J]. 吉林大学学报(工学版), 2018, 48(4): 1140-1146.
[10] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[11] CAO Jing-hua, KONG Fan-sen, RAN Yan-zhong, SONG Rui-chen. Back pressure controller design of air compressor based on fuzzy self-adaptive PID control [J]. 吉林大学学报(工学版), 2018, 48(3): 781-786.
[12] LI Rui, ZHANG Lu-yang, LIU Lin, WU Yue-yuan, CHEN Shi-wei. Magneto-rheological vibration isolation for three-span bridge based on similarity theory [J]. 吉林大学学报(工学版), 2018, 48(3): 787-795.
[13] CHEN Zhong-min, HOU Li, DUAN Yang, ZHANG Qi, YANG Zhong-xue, JIANG Yi-qiang. Vibration analysis of a new pin-cycloid speed reducer [J]. 吉林大学学报(工学版), 2018, 48(1): 174-185.
[14] LIU Nian, XU Tao, XU Tian-shuang, HU Xian-lei, LIU Wei-hai. Lightweight design of TRB dashboard cross beam [J]. 吉林大学学报(工学版), 2018, 48(1): 199-204.
[15] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] ZHU Jian-feng, LIN Yi, CHEN Xiao-kai, SHI Guo-biao. Structural topology optimization based design of automotive transmission housing structure[J]. 吉林大学学报(工学版), 2013, 43(03): 584 -589 .
[5] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd