吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (3): 711-717.doi: 10.13229/j.cnki.jdxbgxb201603005

• 论文 • 上一篇    下一篇

气压电控制动系统仿真平台及补偿控制策略开发

宗长富1, 万滢1, 赵伟强1, 张不扬1, 韩正铁2   

  1. 1.吉林大学 汽车仿真与控制国家重点实验室,长春 130022;
    2.平壤机械大学 机械学院, 平壤 999093
  • 收稿日期:2014-10-30 出版日期:2016-06-20 发布日期:2016-06-20
  • 作者简介:宗长富(1962),男,教授,博士生导师.研究方向:汽车仿真与控制研究.E-mail:378811297@qq.com
  • 基金资助:
    国家自然科学基金项目(51075176); 吉林大学研究生创新基金项目(2015118).

Development of simulation platform and hysteresis control strategy of pneumatic electronic braking system for commercial vehicles

ZONG Chang-fu1, WAN Ying1, ZHAO Wei-qiang1, ZHANG Bu-yang1, HAN Zheng-tie2   

  1. 1.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China;
    2.School of Mechanical Engineering,Pyongyang University of Mechanical Engineering,Pyongyang 999093,Korea
  • Received:2014-10-30 Online:2016-06-20 Published:2016-06-20

RICH HTML

2   

PDF (PC)

186

摘要： 为改善比例继动阀的工作特性和整车制动性能,建立并验证了包含电控制动系统EBS部件、能够反映EBS制动系统性能的Simulink & AMESim联合仿真商用车整车动力学仿真平台;根据仿真分析和试验测试结果提出了逆滞环前馈补偿和PID压力闭环相结合的比例继动阀迟滞补偿压力控制策略;最后,基于所开发的AMESim比例继动阀仿真模型、硬件在环试验台和EBS整车仿真平台对本文控制策略进行了验证。结果表明,本文的压力控制策略使比例继动阀的压力响应提前76%,基本消除了静态迟滞特性,同时使制动距离减小2.8%。

关键词: 车辆工程, 比例继动阀压力控制, 迟滞补偿, 气压电控制动系统, EBS整车动力学模型

Abstract: To eliminate the hysteresis characteristics of proportional relay valve and its influence on heavy vehicle braking performance, the response time and hysteresis characteristics of the proportional valves were tested. A vehicle dynamic simulation platform was developed using MATLAB/Simulink and AMESim for the purpose of Electric Braking System (EBS) control strategy development and braking performance analysis. The platform consists of pneumatic EBS components and it can reflect the EBS performance. A hysteresis compensation method, which integrates PID closed loop control and the feedforward compensation control, was proposed for mitigating the hysteresis characteristics of the proportional relay valve. Experiments were conducted on the simulation platform to evaluate the effect of the control strategy on the valve characteristics and vehicle braking performance. Results show that using the proposed pressure control strategy the pressure response of the proportional relay valve is advanced by 76% and the static hysteresis is almost eliminated. Meanwhile, the braking distance is reduced by 2.8%.

Key words: vehicle engineering, pressure control of proportional relay valve, hysteresis compensation, pneumatic electronic braking system, vehicle dynamic model with PEBS

中图分类号: 

  • U463.52
[1] 赵伟强,宗长富,郑宏宇,等.基于制动舒适性的商用车EBS控制策略[J].吉林大学学报:工学版,2012,42(Sup.1):22-26.
Zhao Wei-qiang,Zong Chang-fu,Zheng Hong-yu,et al. Control strategy of commercial vehicle electronic braking system based on braking comfort[J]. Journal of Jilin University (Engineering and Technology Edition),2012,42(Sup.1):22-26.
[2] 郑宏宇,王琳琳,赵伟强,等.基于电控制动系统的客车制动力分配控制策略[J].吉林大学学报:工学版,2015,45(2):347-351.
Zheng Hong-yu,Wang Lin-lin,Zhao Wei-qiang,et al. Raking force distribution control strategy of bus based on electronically controlled braking system[J]. Journal of Jilin University (Engineering and Technology Edition),2015,45(2):347-351.
[3] Shyrokau B,Wang D,Augsburg K,et al.Vehicle dynamics with brake hysteresis[J].Proceedings of the Institution of Mechanical Engineers,Part D:Journal of Automobile Engineering,2013,227(2):139-150.
[4] Szente V,Vad J,Lorant G,et al. Computational and experimental investigation on dynamics of electric braking systems[C]∥Proceedings of 7th Scandinavian International Conference on Fluid Power,Linkoping,Sweden,2001:1-10.
[5] Bu F P,Tan H S.Pneumatic brake control for precision stopping of heavy-duty vehicles[J].IEEE Transactions on Control Systems Technology,2007,15(1):53-64.
[6] Hamdan M,Gao Z Q.Novel PID controller for pneumatic proportional valves with hysteresis[C]∥Conference Record - IAS Annual Meeting (IEEE Industry Applications Society),2000,2:1198-1201.
[7] Shyrokau B,Wang D,Augsburg K,et al.Modeling and control of hysteresis-characterized brake processes[C]∥Eurobrake 2012-MS-25,2012.
[8] Miller J I,Cebon D. A high performance pneumatic braking system for heavy vehicles[J]. System Dynamics,2010,48(S1):373-392.
[9] 王鹏宇,王庆年,胡安平,等.基于Simulink-AMESim联合仿真的混合动力客车再生制动系统分析[J].吉林大学学报:工学版,2008,38(Sup.1):7-11.
Wang Peng-yu,Wang Qing-nian,Hu An-ping,et al. Analysis of regenerative brake system of hybrid bus based on Simulink-AMESim co-simulation[J]. Journal of Jilin University (Engineering and Technology Edition),2008, 38(Sup.1):7-11.
[10] 韩正铁,宗长富,赵伟强,等.商用车EBS系统比例继动阀特性与控制方法[J].农业机械学报,2014,45(10):1-6.
Han Zheng-tie,Zong Chang-fu,Zhao Wei-qiang,et al.Characteristics and control method of proportional relay valve for commercial vehicle EBS[J].Transactions of the Chinese Society for Agricultural Machinery,2014,45(10):1-6.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发