吉林大学学报(工学版) ›› 2021, Vol. 51 ›› Issue (5): 1575-1582.doi: 10.13229/j.cnki.jdxbgxb20200544

• 车辆工程·机械工程 • 上一篇    

驾驶员意图识别的P2.5插混构型双离合器起步控制

罗勇1,2,3(),韦永恒2,黄欢2,肖人杰2,任淋2,崔环宇3   

  1. 1.中国汽车工程研究院股份有限公司 汽车噪声振动和安全技术国家重点实验室，重庆 401122
    2.重庆理工大学 汽车零部件先进制造技术教育部重点实验室，重庆 400054
    3.重庆青山工业有限责任公司 技术部，重庆 402761
  • 收稿日期:2020-07-19 出版日期:2021-09-01 发布日期:2021-09-16
  • 作者简介:罗勇（1983-），男，副教授，硕士生导师.研究方向：车辆动力传动与控制.E-mail：cquluo@126.com
  • 基金资助:
    国家自然科学基金项目(51305475);汽车噪声振动和安全技术国家重点实验室2017年度开放基金项目(NVHSKL-201702);重庆市教委科学技术研究项目(KJQN201801143);重庆市自然科学基金面上项目(cstc2019jcyj-msxmX0308);重庆理工大学车辆学院科研支撑项目(CL2019-16)

Starting control of P2.5 plug⁃in hybrid configuration dual⁃clutch based on driver's intention recognition

Yong LUO1,2,3(),Yong-heng WEI2,Huan HUANG2,Ren-jie XIAO2,Lin REN2,Huan-yu CUI3   

  1. 1.State Key Laboratory of Vehicle NVH and Safety Control，China Automotive Engineering Research Institute Co. ，Ltd. ，Chongqing 401122，China
    2.Key Laboratory of Advanced Manufacturing Technology for Automobile Parts，Chongqing University of Technology，Chongqing 400054，China
    3.Department of Technology，Chongqing Tsingshan Industrial Co. ，Ltd. ，Chongqing 402761，China
  • Received:2020-07-19 Online:2021-09-01 Published:2021-09-16

RICH HTML

 5   

PDF (PC)

123

摘要：

双离合变速器（DCT）在单离合器起步过程中，离合器片温升明显、滑摩功不均匀，严重影响其使用寿命。针对此种情况，基于搭载DCT的P2.5插电式混合动力构型，结合起步动力学分析，考虑驾驶员起步意图，提出了一种基于多层模糊控制的起步策略。根据加速踏板开度及其变化率识别驾驶员起步意图，结合起步意图推导离合器结合油压，控制传递扭矩，同时根据驾驶员起步意图判断离合器的分离阈值。结果表明：相比单离合器起步，双离合联合起步能有效平衡两个离合器滑摩功的同时，起步时间最高缩短12.6%，冲击度最高降低14.0%。

关键词: 车辆工程, P2.5插电式混合动力构型, 湿式双离合变速器, 多层模糊控制器, 驾驶员起步意图识别

Abstract:

During the starting process of single clutch， the temperature rise of clutch plate is obvious and the sliding friction power is uneven， which seriously affects the service life of DCT. Based on the configuration of P2.5 plug-in hybrid electric vehicle equipped with DCT， combined with the starting dynamics analysis and considering the driver's starting intention， a starting strategy based on multi-layer fuzzy control is proposed. The driver's starting intention is identified according to the accelerator pedal opening and its change rate， and the clutch combination oil pressure is deduced according to the starting intention to control the transmission torque， at the same time， the clutch separation threshold is judged according to the driver's starting intention. The results show that： compared with single clutch starting， the starting time can be shortened by 12.6% and the impact degree can be reduced by 14.0% while effectively balancing the sliding work of the two clutches.

Key words: vehicle engineering, P2.5 plug-in hybrid configuration, wet dual clutch transmission, multilayer fuzzy controller, driver's starting intention recognition

中图分类号: 

  • TH13

图1

基于DCT的P2.5插电式混合动力系统结构简图"

图2

离合器油压/传递扭矩图"

图3

基于P2.5构型的DCT系统动力学简化模型"

图4

双离合器联合起步过程控制逻辑简图"

图5

驾驶员起步意图验证仿真"

图6

加速踏板开度15%起步过程仿真结果"

图7

加速踏板开度15%起步过程仿真结果"

1 DeCarolis J, Daly H, Dodds P, et al. Formalizing best practice for energy system optimization modelling[J]. Applied Energy, 2017, 194: 184-198.
2 杨文斌, 何东伟. Position 2(P2)构型混合动力文献综述[J]. 科技视界, 2018, 255(33): 87-88.
Yang Wen-bin, He Dong-wei. Literature review of Position2(P2) configuration hybrid power[J]. Science & Technology Vision, 2018, 255(33): 87-88.
3 王琪, 赵治国, 陈海军, 等. DCT混合动力汽车构型分析[J]. 汽车技术, 2013, 10(5): 29-33.
Wang Qi, Zhao Zhi-guo, Chen Hai-jun, et al. Configuration analysis of hybrid electric vehicle equipped with dual clutch transmission[J]. Automobile Technology, 2013, 10(5): 29-33.
4 Hong J, Wang Z, Zhang T, et al. Research on integration simulation and balance control of a novel load isolated pure electric driving system[J]. Energy, 2019, 189: 116220.
5 Kulkarni M, Shim T, Zhang Y. Shift dynamics and control of dual-clutch transmissions[J]. Mechanism and Machine Theory, 2007, 42(2): 168-182.
6 Goetz M, Levesley M C, Crolla D A. Dynamics and control of gearshifts on twin-clutch transmissions[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005, 219(8): 951-963.
7 Bao R, Avila V, Baxter J. Effect of 48 V mild hybrid system layout on powertrain system efficiency and its potential of fuel economy improvement[C]∥SAE Technical Paper, 2017-01-1175.
8 Xu X, Liang Y, Jordan M, et al. Optimized control of engine start assisted by the disconnect clutch in a P2 hybrid automatic transmissions[J]. Mechanical Systems and Signal Processing, 2019, 124: 313-329.
9 Yang C, Song J, Li L, et al. Economical launching and accelerating control strategy for a single-shaft parallel hybrid electric bus[J]. Mechanical Systems and Signal Processing, 2016, 76: 649-664.
10 Tao G, Wu M, Meng F. Online performance evaluation of a heavy-duty automatic transmission launching process[J]. Mechatronics, 2016, 38: 143-150.
11 王伟, 王庆年, 田涌君, 等. 基于模糊控制功率分流式混合动力客车控制策略[J]. 吉林大学学报: 工学版, 2017, 47(2): 337-343.
Wang Wei, Wang Qing-nian, Tian Yong-jun,et al. Control strategy of power-split hybrid electric bus based on fuzzy control[J]. Journal of Jilin University(Engineering and Technology Edition), 2017, 47(2): 337-343.
12 Zhang J, Guo J, Gui L. Study on launch control strategies of dual clutch transmission[C]∥2012 IEEE International Conference on Mechatronics and Automation, Chengdu, China, 2012: 1142-1147.
13 Zhao Z G, Jiang J L, Yu Z P, et al. Starting sliding mode variable structure that coordinates the control and real-time optimization of dry dual clutch transmissions[J]. International Journal of Automotive Technology, 2013, 14(6): 875-888.
14 Wu X G, Wang X D, Yu T W, et al. Control of electromagnetic clutch during vehicles start[C]∥2008 IEEE Vehicle Power and Propulsion Conference, Harbin, China, 2008, 1-5.
15 Zhao Z, Li X, He L, et al. Estimation of torques transmitted by twin-clutch of dry dual-clutch transmission during vehicle's launching process[J]. IEEE Transactions on Vehicular Technology, 2016, 66(6): 4727-4741.
16 秦大同, 杨官龙, 胡明辉, 等. 基于驾驶意图的插电式混合动力汽车能量管理策略[J]. 吉林大学学报: 工学版, 2015, 45(6): 1743-1750.
Qin Da-tong, Yang Guan-long, Hu Ming-hui, et al. Energy management strategy of plug-in hybrid electric vehicle based on driving intention[J]. Journal of Jilin University(Engineering and Technology Edition), 2015, 45(6): 1743-1750.
17 Zhao Z G, Chen H J, Zhen Z X, et al. Optimal torque coordinating control of the launching with twin clutches simultaneously involved for dry dual-clutch transmission[J]. Vehicle System Dynamics, 2014, 52(6): 776-801.
18 Shi G, Liu Y, Han X, et al. Control strategy of vehicle automatic transmissions matching with start-stop system[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(12): 91-98.
19 You Y, Sun D, Qin D. Research on vehicle starting control based on reflux power condition[J]. Mechanism and Machine Theory, 2019, 134: 289-307.
20 宋世欣, 张元侠, 刘科, 等. 双离合器自动变速器控制品质评价指标分析[J]. 汽车工程, 2015(8): 925-930, 958.
Song Shi-xin, Zhang Yuan-xia, Liu Ke, et al. An analysis on the evaluation metrics of control quality for vehicle with dual clutch transmission[J]. Automotive Engineering, 2015(8): 925-930, 958.
[1] 陈鑫,于贵申,张彪,潘凯旋,杨立飞. 搅拌摩擦点焊接头拉伸-剪切行为的等效建模[J]. 吉林大学学报(工学版), 2021, 51(4): 1190-1197.
[2] 杨建,夏琦,周海超,王国林. 修正胎体弦轮廓载重子午线轮胎的降噪机理[J]. 吉林大学学报(工学版), 2021, 51(4): 1198-1203.
[3] 龙江启,向锦涛,俞平,王骏骋. 适用于非线性主动悬架滑模控制的线性干扰观测器[J]. 吉林大学学报(工学版), 2021, 51(4): 1230-1240.
[4] 兰凤崇,李继文,陈吉清. 面向动态场景复合深度学习与并行计算的DG-SLAM算法[J]. 吉林大学学报(工学版), 2021, 51(4): 1437-1446.
[5] 王波,何洋扬,聂冰冰,许述财,张金换. 底部爆炸条件下车内乘员的腹部损伤[J]. 吉林大学学报(工学版), 2021, 51(3): 792-798.
[6] 庄蔚敏,王鹏跃,高瑞娟,解东旋. 温热成形对AA5754铝合金静态力学性能的影响[J]. 吉林大学学报(工学版), 2021, 51(3): 847-854.
[7] 宋强,孙丹婷,章伟. 纯电动车机械式自动变速器换挡非线性建模及控制[J]. 吉林大学学报(工学版), 2021, 51(3): 810-819.
[8] 宋大凤,杨丽丽,曾小华,王星琦,梁伟智,杨南南. 基于行驶工况合成的混合动力汽车电池寿命优化[J]. 吉林大学学报(工学版), 2021, 51(3): 781-791.
[9] 张家旭,王欣志,赵健,施正堂. 汽车高速换道避让路径规划及离散滑模跟踪控制[J]. 吉林大学学报(工学版), 2021, 51(3): 1081-1090.
[10] 何仁,赵晓聪,杨奕彬,王建强. 基于驾驶人风险响应机制的人机共驾模型[J]. 吉林大学学报(工学版), 2021, 51(3): 799-809.
[11] 王伟达,武燕杰,史家磊,李亮. 基于驾驶员意图识别的电子液压制动助力系统控制策略[J]. 吉林大学学报(工学版), 2021, 51(2): 406-413.
[12] 陈国迎,姚军,王鹏,夏其坤. 适用于后轮轮毂驱动车辆的稳定性控制策略[J]. 吉林大学学报(工学版), 2021, 51(2): 397-405.
[13] 李寿涛,王蕊,徐靖淳,王德军,田彦涛,于丁力. 一种基于模型预测复合控制的车辆避碰控制方法[J]. 吉林大学学报(工学版), 2021, 51(2): 738-746.
[14] 熊璐,魏琰超,高乐天. 基于惯性测量单元/轮速融合的车辆零速检测方法[J]. 吉林大学学报(工学版), 2021, 51(1): 134-138.
[15] 马芳武,梁鸿宇,王强,蒲永锋. 双材料负泊松比结构的面内冲击动力学性能[J]. 吉林大学学报(工学版), 2021, 51(1): 114-121.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发