吉林大学学报(工学版)

• • 上一篇    下一篇

基于目标控制器的四轮驱动汽车沙地牵引力控制系统

宋大凤1,李静1,马志敏2,赵健1,李幼德1   

  1. 1.吉林大学 汽车工程学院,长春 130022; 2.浙江亚太机电股份有限公司, 杭州 311203
  • 收稿日期:2005-06-20 修回日期:2005-09-17 出版日期:2006-05-01 发布日期:2006-05-01
  • 通讯作者: 李幼德

Four wheel drive vehicle traction control system on sandy terrain based on target controller

Song Da-feng1, Li Jing1, Ma Zhi-min2, Zhao Jian1, Li You-de1   

  1. 1.College of Automotive Engineering,Jilin University,Changchun 130022,China; 2.Zhejiang AsiaPacific Machine & Electronic Co., Ltd., Hangzhou 311203, China
  • Received:2005-06-20 Revised:2005-09-17 Online:2006-05-01 Published:2006-05-01
  • Contact: Li Youde

摘要: 针对车辆在实际沙地上行驶的特点,应用将PI控制与门限控制联合起来的控制方法设计了沙地牵引力控制油门控制系统。在某沙矿场的沙地上进行了基于目标控制器的汽车直线行驶牵引力控制实车道路试验。试验结果表明:采用PI控制和门限控制建立的油门控制系统能够消除驱动轮的过度滑转,防止驱动车轮在沙地上下陷,从而减小汽车行驶的推土阻力,提高汽车在沙地上的通过性和牵引性。

关键词: 车辆工程, 汽车牵引力控制, 目标控制器, 沙地, 道路试验

Abstract: :According to the driving behavior of the four wheel drive vehicle on the sand terrain, an engine throttle controller for the traction control system(TCS) on the sand terrain was developed using the combination of the PI control and the threshold control. The road test of the TCS based on the target controller for the vehicle driving straightaway was performed on the sand terrain of a sandpit. The test results show that the developed throttle controller can effectively avoid the excessive spin of the driving wheels and prevent the driving wheels from sinking into the sand, so that the driving resistance of the vehicle can be reduced and the vehicle driving ability and traction performance can be improved.

Key words: vehicle engineering, traction control, target controller, sandy terrain, road test

中图分类号: 

  • U463.54
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!