吉林大学学报(工学版)

• • 上一篇    下一篇

电动轮驱动汽车动力学仿真模型及试验验证

靳立强,王庆年,宋传学   

  1. 吉林大学 汽车动态模拟国家重点实验室,长春 130022
  • 收稿日期:2006-04-05 修回日期:2006-07-25 出版日期:2007-07-01 发布日期:2007-07-01
  • 通讯作者: 王庆年

Dynamic simulation model and experimental validation for vehicle with motorized wheels

Jin Li-qiang, Wang Qing-nian, Song Chuan-xue   

  1. State Key Laboratory of Automobile Dynamic Simulation, Jilin University, Changchun 130022, China
  • Received:2006-04-05 Revised:2006-07-25 Online:2007-07-01 Published:2007-07-01
  • Contact: Wang Qing-nian

摘要: 提出了电动轮驱动汽车的18自由度动力学模型,包括车体的6个运动自由度,4个车轮的转向、转动及垂向运动的12个自由度。该模型具有自由度较多,仿真参数易获取且精度较高的特点。利用所开发的电动轮驱动汽车进行了相关操纵稳定性试验,并将试验结果与相同工况下的仿真结果进行了对比,结果表明所建模型仿真结果与试验结果吻合良好,验证了模型的有效性。在此基础上,利用所建模型对汽车极限行驶工况时的动力学特性进行了仿真,仿真结果与实车运动特性相符。该模型为研究电动轮驱动汽车的动力学特性奠定了基础。

关键词: 车辆工程, 电动汽车, 电动轮, 动力学模型, 动力学仿真

Abstract: A dynamic model with 18 degrees of freedom(DOF),including the 6 DOF of the vehicle body and the 12 DOF of the steering,the rotation and the vertical motion of 4 wheels,was proposed for the electric vehicle with motorized wheels(EVMW). The model is characterized by a large number of DOF,high simulation precision and being easy to get the simulation parameters.The test for the handling stability of the developed EVMW was performed and the test results were compared with the simulation ones under the same driving conditions.The good agreement between the test and the simulation proves the validity and the practicality of the model.Furthermore,the dynamic performance of the EVMW under the limit driving conditions was simulated by the proposed model and resulted in coincidence with that of the real vehicle.The model provides a basis for the study of the dynamic performance of the EVMW.

Key words: vehicle engineering, electric vehicle, motorized wheel, dynamics model, dynamic simulation

中图分类号: 

  • U463
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 李战东,陶建国,罗阳,孙浩,丁亮,邓宗全. 核电水池推力附着机器人系统设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1820-1826.
[7] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[8] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[9] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[10] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[11] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[12] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[13] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[14] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[15] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!