吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (6): 1564-1570.doi: 10.13229/j.cnki.jdxbgxb201406005

• • 上一篇    下一篇

基于局部搜索和整体优化的客车杆件截面参数正向设计

那景新, 高剑峰   

  1. 吉林大学 汽车仿真与控制国家重点实验室,长春 130022
  • 收稿日期:2013-09-24 出版日期:2014-11-01 发布日期:2014-11-01
  • 作者简介:那景新(1957-),男,教授,博士生导师.研究方向:汽车设计理论与轻量化技术.E-mail:
  • 基金资助:
    国家自然科学基金项目(51075187)

Top-down design method based on local search and global optimization for cross-sectional size of bus body

NA Jing-xin, GAO Jian-feng   

  1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
  • Received:2013-09-24 Online:2014-11-01 Published:2014-11-01

RICH HTML

0   

PDF (PC)

532

摘要： 首先建立了局部一维搜索方法,以客车车身线框模型与型钢截面库为基础,通过截面库优化排序、杆件局部模型一维搜索以及局部-整体迭代等优化步骤,得出一个满足多工况强度要求的车身结构杆件截面尺寸下限。然后通过灵敏度分析选择关键杆件,利用多目标遗传算法NSGA-II对选定杆件的截面尺寸在截面库的范围内进行优化,以提高整体刚度及模态性能。最后在某承载式客车车身杆件截面优化设计中,将该方法的优化结果作为设计输入,结果表明,车身结构的最终方案具有明显的轻量化效果。

关键词: 车辆工程, 客车车身, 正向设计, 截面优化, 一维搜索, 多目标遗传算法

Abstract: In this paper, first, the lightest structure under the strength condition was obtained via the implementation of strength optimization based on the wire-frame model of body structure and the sectional library. Sequencing optimization of the sectional library, local line search and local-global iterative process were contained in the strength optimization. Second, sensitivity analysis was carried out to select design variables, which are more sensitive to the stiffness and modal frequency of the body structure. Finally, the selected variables were optimized within the limits of sectional library to improve the performance of the body stiffness and modal frequency using the multi-objective genetic algorithm NSGA-II. This approach was implemented into the design process of an integral bus body. The results indicate that the proposed sectional optimization method is efficient and conducive to light-weighting of bus bodies.

Key words: vehicle engineering, bus body, top-down design, sectional optimization, line search, multi-objective genetic algorithm

中图分类号: 

  • U463.82
[1] 刘江,桂良进,王青春,等. 全承载式大客车车身结构多目标优化[J]. 汽车工程,2008,30(2):170-173. Liu Jiang, Gui Liang-jin, Wang Qing-chun,et al. Multi-objective optimization on the body structure of integral bus[J]. Automotive Engineering, 2008, 30(2): 170-173.
[2] 石琴,张代胜,谷叶水,等. 大客车车身骨架结构强度分析及其改进设计[J].汽车工程,2007,29(1):87-92. Shi Qin, Zhang Dai-sheng, Gu Ye-shui, et al. A study on the improvement of the strength of bus body[J]. Automotive Engineering,2007,29(1):87-92.
[3] Su Rui-yi, Gui Liang-jin, Fan Zi-jie. Multi-objective optimization for bus body with strength and rollover safety constraints based on surrogate models[J]. Struct Multidisc Optim,2011,44(3):431-441.
[4] Gauchia A, Diaz V, Boada M J. Torsional stiffness and weight optimization of a real bus structure[J]. International Journal of Automotive Technology, 2010,11(1):41-47.
[5] 张军,林程,张国明. 基于遗传算法的客车车身骨架优化设计[J].北京理工大学学报,2008,28(1):45-49. Zhang Jun, Lin Cheng, Zhang Guo-ming. An optimizing design method of bus body frame based on genetic algorithm[J]. Transactions of Beijing Institute of Technology,2008,28(1):45-49.
[6] 曹文钢,曲令晋,白迎春. 基于灵敏度分析的客车车身质量优化研究[J].汽车工程, 2009,31(3):278-281. Cao Wen-gang, Qu Ling-jin, Bai Ying-chun. A study on the mass optimization of bus body based on sensitivity analysis[J]. Automotive Engineering, 2009, 31(3):278-281.
[7] 张代胜,张林涛,谭继锦,等. 基于刚度灵敏度分析的客车车身轻量化研究[J]. 汽车工程, 2008,30(8):718-720. Zhang Dai-sheng, Zhang Lin-tao, Tan Ji-jin, et al. A research on the lightweighting of bus body based on stiffness sensitivity analysis[J]. Automotive Engineering,2008,30(8):718-720.
[8] Lan F, Chen J, Lin J. Comparative analysis for bus side structures and lightweight optimization[J]. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 2004,218(D10):1067-1075.
[9] 姚成,朱铭. 全承载式客车车身结构设计[J]. 客车技术与研究,2008(2):13-16. Yao Cheng, Zhu Ming. Design of monocoque bus body structure[J]. Bus Technology and Research, 2008(2):13-16.
[10] Kalyanmoy D, Amrit P, Sameer A, et al. A fast and elitist multiobjective genetic algorithm: NSGA-II[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2):182-196.
[11] Zhao Wan-zhong, Wang Chun-yan, Sun Pei-kun, et al. Primary studies on integration optimization of differential steering of electric vehicle with motorized wheels based on quality engineering[J]. Science China Technological Sciences,2011,54(11): 3047-3053.
[12] Gu Xian-guang, Sun Guang-yong, Li Guang-yao, et al. A comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure[J]. Structural and Multidisciplinary Optimization, 2013, 48(3): 669-684.
[13] Fang Lin-cun, Qin Shi-yin, Xu Gang, et al. Simultaneous optimization for hybrid electric vehicle parameters based on multi-objective genetic algorithms[J]. Energies,2011,4(3):532-544.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发