吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 58-63.doi: 10.13229/j.cnki.jdxbgxb201701009

• 论文 • 上一篇    下一篇

基于简化碰撞仿真模型的概念汽车部件布局优化

麻凯1, 2, 高继东1, 徐涛3   

  1. 1.中国汽车技术研究中心 汽车工程研究院,天津 300300;
    2.中汽研(天津)汽车工程研究院有限公司 博士后工作站,天津 300300;
    3.吉林大学 机械科学与工程学院,长春 130022
  • 收稿日期:2015-01-25 出版日期:2017-01-20 发布日期:2017-01-20
  • 通讯作者: 高继东(1976-),男,教授级高级工程师.研究方向:车辆工程.E-mail:gaojidong@catarc.ac.cn
  • 作者简介:麻凯(1978-),男,副教授,博士.研究方向:固体力学.E-mail:makai@jlu.edu.cn
  • 基金资助:
    吉林省科技厅青年科研基金项目(20130522180JH).

Optimization of the layout of concept vehicle key parts based on simplified auto crash simulation model

MA Kai1, 2, GAO Ji-dong1, XU Tao3   

  1. 1.Automotive Engineering Research Institute,China Automotive Technology and Research Center,Tianjin 300300, China;
    2.China Automotive Technology and Research Center(Tianjin) Automotive Engineering Research Institute Co.,Ltd.,Tianjin 300300,China;
    3.College of Mechanical Science and Engineering, Jilin University,Changchun 130022,China
  • Received:2015-01-25 Online:2017-01-20 Published:2017-01-20

RICH HTML

0   

PDF (PC)

478

摘要： 提出了基于被动安全的概念车简化模型下的主要部件布局的多目标优化设计方法。首先用多质量弹簧系统等效成整车模型,再用弹簧刚度折线表示各个主要部件的受力关系,用最大相对位移量描述各个主要部件的相对位置关系,即整车结构布局参数,最后使用多目标优化方法以加速度峰值等为目标、整车结构布局参数为参数迭代计算得到优化解。最后通过仿真算例验证了本文方法的有效性。

关键词: 车辆工程, 汽车碰撞, 关键点, 多目标优化方法, 被动安全, 机械振动方法

Abstract: The power assembly acceleration, the maximum car-body acceleration and power acceleration stiffness are the most important factors in vehicle passive safety. Therefore, in concept auto design these factors must be considered. In this paper a layout optimization method of the key parts of simplified model of concept auto, equivalent to a mass-spring system, is proposed. In the system, the forces among the parts are transformed to spring stiffness broken lines, and relative positions of the key parts are described by the relative maximum displacements, which are taken as the parameters in the optimization. Multi-objective optimization is applied in the concept car layout, and the objectives are the acceleration and so on. The overall optimal lay out of the vehicle structure is obtained by parameter iteration. The feasibility of the proposed optimization method is proved by simulation of a concept vehicle lay out example.

Key words: vehicle engineering, automobile collision, key point, multi-objectives optimization method, passive safety, mechanical vibration method

中图分类号: 

  • U462.2
[1] Hallman J J,Yoganandan N, Pintar F A, et al. Injury difference between small and large overlap frontal crashes[C]∥The 55th Annals of Advances in Automotive Medicine, San Diego, CA, 2011: 147-157.
[2] Sherwood C P, Nolan J M, Zuby D S. Characteristics of small overlap crashes[C]∥Proceedings of the 21st International Technical Conference on the Enhanced Safety of Vehicles, Germany, 2009.
[3] Pintar F A, Yoganandan N, Maiman D J. Injury mechanisms and severity in narrow offset frontal impacts[C]∥The 52nd Annals of Advances in Automotive Medicine, San Diego, CA, 2008: 185-189.
[4] Chen Keming, Yang Wei, Qiao Xin, et al. Vehicle small overlap frontal impact analysis[C]∥The 15th Conf of Automotive Safety Technology, Wuhu, China, 2012: 178-182.
[5] ANSYS inc. ANSYS Manual[M]. 3rd ed. USA:SA IP Inc, 1997:1-20.
[6] Astrom K J, Wittenmark B. Adaptive Control[M]. New York: Addison Wesley Publishing Company, 1989: 1-35.
[7] 郭孔辉.汽车操纵动力学[M].长春:吉林科学技术出版社,1991:8-69.
[8] Wolfgang Matschinsky.Road Vehicle Suspensions[M].London: Professional Engineering Pub,2000:19-50.
[9] Pacejka H B. Tyre and Vehicle Dynamics[M]. Oxford: Butterworth Heinemann ,2002:92-157.
[10] Jörnsen Reimpell.The Automotive Chassis:Engineering Principles[M].Oxford:Butterworth- Heinemann,2001:150-182.
[11] Yang Xiao-bo, Medepalli Sudhakar. Sensitivities of suspension bushings on vehicle impact harshness performances[C]∥SAE Paper,2005-01-0827.
[12] Liu Xiao-ping, Jiang Si-yuan. A DOE based approach to multi-response optimization[C]∥SAE Paper,2003-01-0880.
[13] Park Joonhong,Guenther Dennis A,Heydinger Gary J. Kinematic suspension model applicable to dynamic full vehicle simulation[C]∥SAE Paper,2003-01-0859.
[14] Wang Tao, Tao Wei. Multi-objective robust optimization of automobile suspension parameters considering random factors[J]. Journal of Vibration and Shock,2009,28(11):146-149.
[15] Wang Tao. Multi-objective and multi-criteria decision optimization of automobile suspension parameters[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009,40(4):27-32.
[16] Wu Jie, Shangguan Wen-bin, Chen Su-huan. Improved dynamic optimization method for uncertain structures with interval parameters[J]. Noise and Vibration Control,2008,28(1):27-32.
[17] Chen Su-huan, Wu Jie, Chen Yu-dong. Interval optimization for uncertain structures[J]. Finite Elements in Analysis and Design, 2004,40(1):1379-1398.
[18] Chen Su-huan, Wu Jie. Interval optimization of dynamic response for uncertain structures with natural frequency constraints[J]. Engineering Structures, 2004,26(3) :221-232.
[19] 麻凯,陈塑寰. 结构优化中的海森矩阵的近似迭代方法[J]. 吉林大学学报:工学版,2006,36(2): 30-33.
Ma Kai,Chen Su-huan. Iterative approximation algorithm of Hessian matrix in structural optimization[J]. Journal of Jilin University(Engineering and Technology Edition), 2006,36(2):30-33.
[20] 麻凯,陈塑寰. 板壳加筋结构组合优化方法[J]. 东北大学学报:自然科学版,2008,38(2):400-405.
Ma Kai,Chen Su-huan. Combined optimization method of plate-shell structures with stiffeners[J]. Journal of Northeastern University(Natural Science), 2008,38(2):400-405.
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发