吉林大学学报(工学版) ›› 2023, Vol. 53 ›› Issue (4): 964-972.doi: 10.13229/j.cnki.jdxbgxb.20220234

• 车辆工程·机械工程 • 上一篇    下一篇

板簧式弹性金属车轮胎面弹片结构优化

金敬福1(),董新桔1,贾志成1,王康2,贺连彬1,邹猛1,齐迎春1()   

  1. 1.吉林大学 生物与农业工程学院，长春 130022
    2.中国空间技术研究院 北京空间飞行器总体设计部，北京 100094
  • 收稿日期:2022-03-15 出版日期:2023-04-01 发布日期:2023-04-20
  • 通讯作者: 齐迎春 E-mail:jinjingfu@jlu.edu.cn;qiyc@jlu.edu.cn
  • 作者简介:金敬福（1978-），男，教授，博士.研究方向：工程机械仿生设计.E-mail：jinjingfu@jlu.edu.cn
  • 基金资助:
    国家自然科学基金项目(52075217);拖拉机动力系统国家重点实验室开放课题(SKT2022002);吉林大学研究生创新研究基金项目(101832022CX184)

Optimization of the tread plate-spring structure of flexible metal wheel with plate-spring

Jing-fu JIN1(),Xin-ju DONG1,Zhi-cheng JIA1,Kang WANG2,Lian-bin HE1,Meng ZOU1,Ying-chun QI1()   

  1. 1.College of Biological and Agricultural Engineering，Jilin University，Changchun 130022，China
    2.Beijing Institute of Spacecraft System Engineering，China Academy of Space Technology，Beijing 100094，China
  • Received:2022-03-15 Online:2023-04-01 Published:2023-04-20
  • Contact: Ying-chun QI E-mail:jinjingfu@jlu.edu.cn;qiyc@jlu.edu.cn

RICH HTML

 6   

PDF (PC)

257

摘要：

针对现有板簧式弹性金属车轮容易产生应力集中或塑性变形现象，对胎面出现应力集中和大变形原因进行了分析。建立了常规拱形胎面、双边弧形胎面结构三维模型，运用有限元分析方法，对2种胎面在平压、胎面中部承压、胎面单侧承压3种工况下的变形和受力状态模拟，分析表明，胎面两端固定的连接方式会对胎面的受力情况产生影响，造成胎面局部刚度过大或承载能力不足的缺陷。根据仿真结果进一步优化，提出耦合弹性胎面结构，改变胎面两端固定约束，将胎面径向位移转移到轮毂轴向外扩，通过轴向位移实现径向位移的拓展。有限元模拟表明，在3种相同工况下，耦合弹性胎面结构可获得更大的径向变形，且胎面具备均匀刚度，变形连续，不产生应力集中区域。试制了耦合弹性金属车轮，并进行车轮承压试验，结果表明耦合弹性胎面结构可有效扩大车轮的径向位移能力，且胎面具备足够的刚度，验证了设计耦合弹性胎面结构的优势。

关键词: 板簧金属轮, 胎面特性, 耦合弹性胎面, 结构设计, 数值模拟

Abstract:

To solve the problem that conventional flexible metal wheels with plate-spring simply have stress concentrations or plastic deformation， the cause of stress concentrations and large deformations in the tread is analyzed. The three-dimensional models of conventional arched tread and bilateral curved tread structure are established. And the deformation and load of the two treads are simulated under three working conditions of flat pressure， middle tread pressure and unilateral tread pressure by using finite element analysis method. The analysis shows that the restrained connection method of the ends of the tread will affect the stress situation of the tread and cause the excessive local rigidity or insufficient load capacity of the tread. According to the simulation results， the coupled flexible tread structure is proposed. The structure that restricts the ends of the tread has been changed. The radial displacement of the tread is transferred to the axial outward tension of the hub， and then the radial displacement is expanded by the axial displacement. Finite element simulation shows that the coupled flexible tread structure can obtain same greater radial deformation under all the three working conditions， and the tread has uniform rigidity， continuous deformation and no stress concentration area. The result shows that the coupled flexible tread structure can effectively expand the radial displacement capacity of the wheel， and the tread has sufficient rigidity， which verifies the advantages of designing the coupled flexible tread structure.

Key words: plate-spring metal wheels, tread characteristics, coupling flexible tread, structural design, numerical simulation

中图分类号: 

  • V19

图1

弹性轮辐车轮"

图2

弹性胎面车轮"

图3

两边约束情况下胎面板簧变形趋势图"

图4

常规弹性胎面车轮结构模型"

图5

拱形胎面结构在各工况下载荷和支撑"

图6

工况1下2种模型总变形和等效应力分布图"

图7

工况2下2种模型总变形和等效应力分布图"

图8

工况3下2种模型总变形和等效应力分布图"

图9

耦合弹性胎面结构板簧变形趋势图"

图10

耦合弹性胎面车轮结构模型"

图11

工况1下耦合弹性胎面模型总变形和等效应力分布图"

图12

工况2下耦合弹性胎面模型总变形和等效应力分布图"

图13

工况3下耦合弹性胎面模型总变形和等效应力分布图"

图14

车轮结构图"

图15

车轮径向载荷-位移曲线"

图16

承载时耦合弹性胎面结构变形情况"

1 Votava J E, Petro N E. Towards a selenographic information system: Apollo 15 Mission Digitization[C]∥AGU Fall Meeting Abstracts. San Francisco:American Geophysical Union,2012.
2 Asnani V, Delap D, Creager C. The development of wheels for the Lunar Roving Vehicle[J].Journal of Terramechanics,2009,46(3):89-103.
3 Murphy Jr T W, Adelberger E G, Battat J B R, et al. Laser ranging to the lost Lunokhod 1 reflector[J]. Icarus, 2011, 211(2):1103-1108.
4 Abdrakhimov A M, Basilevsky A T, Head J W, et al. Luna 17/Lunokhod 1 and Luna 21/Lunokhod 2 landing sites as seen by the Lunokhod and LRO cameras[C]∥Lunar and Planetary Science Conference. Texas:Lunar and Planetary Institute,2011.
5 路达,刘金国,高海波.星球表面着陆巡视一体化探测机器人研究进展[J].航空学报,2020,41(1): 523742.
Lu Da, Liu Jin-guo, Gao Hai-bo. Integrated exploration robots forplanetary surface landing and patrolling:a review[J]. ActaAeronatica et Astronautica Sinica,2020,41(1): 523742.
6 陈百超,邹猛,党兆龙,等.CE-3月球车筛网轮月面沉陷行为试验研究[J].吉林大学学报:工学版,2019,49(6):1836-1843.
Chen Bai-chao, Zou Meng, Dang Zhao-long, et al. Experiment on pressuresinkage for mesh wheels of CE-3 lunar rover on lunar regolith[J].Journal of Jilin University(Engineering and Technology Edition),2019,49(6):1836-1843.
7 Shirley D L. Touching Mars: 1998 status of the Mars robotic exploration program[J]. Acta Astronautica, 1999, 45(4-9): 249-265.
8 Leger P C, Trebi-Ollennu A, Wright J R, et al. Mars exploration rover surface operations: Driving spirit at gusev crater[C]∥2005 IEEE International Conference on Systems Man and Cybernetics Proceedings.Waikoloa, HI: IEEE,2005:1815-1822.
9 Biesiadecki J J, Baumgartner E T, Bonitz R G, et al. Mars exploration rover surface operations[J].IEEE Robotics & Automation Magazine,2006,13(2):63-71.
10 Andrew G. Mars 2020 mission Perseverance rover [EB/OL].[2021/04/01].
11 潘冬, 贾阳, 袁宝峰, 等. 祝融号火星车主动悬架式移动系统设计与验证[J].中国科学:技术科学,2022, 52(02): 278-291.
Pan Dong, Jia Yang, Yuan Bao-feng, et al. Design and verification of the active suspension mobility system of the Zhurong Mars rover[J].Sci Sin Tech, 2022,52:278⁃291.
12 Andy B. NASA & goodyear design airless spring tire for extraterrestrial surfaces[EB/OL]. [2021-04-01].
13 Masursky H. An overview of geological results from Mariner 9[J]. Journal of Geophysical Research, 1973, 78(20):4009⁃4030.
14 Nakashima H. Soil⁃wheel interactions[J]. Encyclopedia of Earth Sciences Series, 2011,4:810-813.
15 路达.基于驱动性能试验的载人月球车车轮结构设计[D].哈尔滨:哈尔滨工业大学机电工程学院,2015.
Lu Da. Research on the wheel design of manned lunar rover vehicle based on experiment of driving performance[D]. Harbin: School of Mechatronics Engineering, Harbin Institute of Technology,2015.
16 Zou M, Zhu J Z, Wang K, et al. Design and mechanical behavior evaluation of flexible metal wheel for crewed lunar rover[J]. Acta Astronautica,2020,176:69-76.
17 Patel N, Slade R, Clemmet J. The ExoMars rover locomotion subsystem[J].Journal of Terramechanics,2010,47(4):227-242.
18 Armin W, Rebele B, Josef R, et al. LRU-lightweight rover unit[C]∥13th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA). Niederlande:Aerospace Center,2015:1-8.
19 申学慧.载人月球车柔性金属车轮结构设计与分析[D].重庆:重庆大学汽车工程学院,2016.
Shen Xue-hui. Structure design and analysis of manned lunar rover flexible metal wheel[D]. Chongqing:College of Automotive Engineering,Chongqing University,2016.
[1] 刘状壮,张有为,季鹏宇,Abshir Ismail Yusuf,李林,郝亚真. 电热型融雪沥青路面传热特性研究[J]. 吉林大学学报(工学版), 2023, 53(2): 523-530.
[2] 华琛,牛润新,余彪. 地面车辆机动性评估方法与应用[J]. 吉林大学学报(工学版), 2022, 52(6): 1229-1244.
[3] 郑植,耿波,王福敏,董俊宏,魏思斯. 既有低等级混凝土护栏防护能力提升[J]. 吉林大学学报(工学版), 2022, 52(6): 1362-1374.
[4] 孙健,彭斌,朱兵国. 新型无油涡旋压缩机内部热力学特性和性能测试[J]. 吉林大学学报(工学版), 2022, 52(12): 2778-2787.
[5] 商拥辉,徐林荣,刘维正,蔡雨. 重载铁路改良土和A组填料过渡段的动力特性[J]. 吉林大学学报(工学版), 2021, 51(6): 2128-2136.
[6] 于征磊,陈立新,徐泽洲,信仁龙,马龙,金敬福,张志辉,江山. 基于增材制造的仿生防护结构力学及回复特性分析[J]. 吉林大学学报(工学版), 2021, 51(4): 1540-1547.
[7] 于征磊,信仁龙,陈立新,朱奕凝,张志辉,曹青,金敬福,赵杰亮. 仿蜂窝防护结构的承载特性[J]. 吉林大学学报(工学版), 2021, 51(3): 1140-1145.
[8] 宫亚峰,逄蕴泽,王博,谭国金,毕海鹏. 基于吉林省路况的新型预制装配式箱涵结构的力学性能[J]. 吉林大学学报(工学版), 2021, 51(3): 917-924.
[9] 苏畅,韩颖,张英朝,苗振华. 轮辐设计特征参数对整车气动特性的影响[J]. 吉林大学学报(工学版), 2021, 51(1): 107-113.
[10] 谷诤巍,陈琳,赵立辉,徐虹,李欣,于歌. 轨道车辆窗下补强板冲压成形模拟[J]. 吉林大学学报(工学版), 2020, 50(2): 504-511.
[11] 陈鑫,王宁,沈传亮,冯晓,杨昌海. 后视镜造型对前侧窗气动噪声的影响[J]. 吉林大学学报(工学版), 2020, 50(2): 426-436.
[12] 施卫平,赵旭,胡兴军,余天明,柳博文,段彦. 天然气开采阻水装置AICD的设计和数值模拟[J]. 吉林大学学报(工学版), 2019, 49(6): 1986-1991.
[13] 宫亚峰,王博,谭国金,张立敏,吴文丁,毕海鹏. 吉林省两种典型装配式箱涵受力特性对比分析[J]. 吉林大学学报(工学版), 2019, 49(6): 1865-1870.
[14] 依卓,付文智,李明哲. 双层剖分式超高压模具数值模拟及实验[J]. 吉林大学学报(工学版), 2019, 49(5): 1593-1599.
[15] 李欣,孙延朋,王丹,陈军绪,谷诤巍,徐虹. 汽车前地板成形有限元数值模拟[J]. 吉林大学学报(工学版), 2019, 49(5): 1608-1614.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发